#####oemnadso.inf mips
[LanguagesSupported]
    ENG


;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SONIC      = "ARC Built-in Ethernet Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "ARC Built-in Ethernet Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "ARC Built-in Ethernet Adapter Driver"
;
; Hardware
;
OptionList     = ^(Options, 1)
OptionTextList = ^(OptionsTextENG, 1)

ProductHardwareDescription      = *($(OptionTextList), ~($(OptionList), $(Option)))

ProductSoftwareTitle    = "ARC Built-in Ethernet Adapter Driver"
ProductHardwareSONICTitle       = "ARC Built-in Ethernet Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for sonic
;

[Warning1ENG]
Error = "No configuration is required for this adapter card."

#####oemnadem.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNKMC     = "3Com 3C523 Etherlink/MC Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "3Com 3C523 Etherlink/MC Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com 3C523 Etherlink/MC Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "3Com 3C523 Etherlink/MC Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "3Com 3C523 Etherlink/MC Adapter Driver"
ProductHardwareTitle    = "3Com 3C523 Etherlink/MC Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for micro channel
;

#####oemnadtm.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    IBMTOKMC     = "IBM Token Ring Adapter /A"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "IBM Token Ring Adapter /A Card Setup"
;
; Software
;
ProductSoftwareDescription      = "IBM Token Ring Adapter /A Driver"
;
; Hardware
;
ProductHardwareDescription      = "IBM Token Ring Adapter /A"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "IBM Token Ring Adapter Driver"
ProductHardwareTitle    = "IBM Token Ring Adapter /A"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Edit1Label = "&Network Address:"

;no translation needed after this

DlgType = "Edit"
DlgTemplate = "NETWORK_NUMBER"
Caption = $(FunctionTitle)

HelpContext = $(!IDH_DB_OEMNADTM_INS)

EditTextLim = 17
EditTextIn  = $(NetworkAddress)
EditFocus   = "ALL"
RCCtlFocusOn = 403

#####oemnadum.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    UBPS     = "Ungermann-Bass Ethernet NIUps Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Ungermann-Bass Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Ungermann-Bass Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Ungermann-Bass Ethernet NIUps Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "Ungermann-Bass Driver"
ProductHardwareTitle    = "Ungermann-Bass Ethernet NIUps Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for micro channel
;

#####oemnadwm.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    WD8003EA = "SMC (WD) 8003E /A"
    WD8003WA = "SMC (WD) 8003W /A"
    WD8013WPA = "SMC (WD) 8013WP /A"
    WD8013EPA = "SMC (WD) 8013EP /A"

;  Disable options
;    WD8003EA = "SMC (WD) 8003E /A"
;    WD8003SA = "SMC (WD) 8003S /A"
;    WD8003WA = "SMC (WD) 8003W /A"
;    WD8013WA = "SMC (WD) 8013W /A"
;    WD8115TRA = "SMC (WD) 8115 /A"
;    BISTOR003EA = "SMC (WD) BISTOR003EA /A"
;    BISTOR013EA = "SMC (WD) BISTOR013EA /A"
;    BISTOR013WA = "SMC (WD) BISTOR013WA /A"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
; Product Info
;
FunctionTitle   = "SMC (WD) "$(Option)" Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "SMC (WD) Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "SMC (WD) "$(Option)" Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "SMC (WD) Adapter Driver"
ProductHardwareTitle    = "SMC (WD) "$(Option)" Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for micro channel
;

#####oemnxpxn.inf all
;------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
;       This lists the languages supported by this file.
;       If you add other languages to this list, you must
;       also add the appropriate text sections for the new
;       language
;------------------------------------------------------------------
[LanguagesSupported]
    ENG

;-------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
;
;       These are the text strings used to identify the options to
;       the user.  There should be a header and entry for every
;       language listed in the "LanguagesSupported" section.
;-------------------------------------------------------------------
[OptionsTextENG]
    MCSXNS     = "MCS XNS Network Transport"

;--------------------------------------------------------------------
;       Language Dependent Dialog Constants
;--------------------------------------------------------------------
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "MCS XNS Setup"
ProductMCSXNSDescription     = "MCS XNS System Driver"
ProductUBNBDescription   = "MCS Ungermann-Bass NetBIOS System Driver"
ProductMCSXNSDisplayName = "MCS XNS Network Transport"
ProductMCSXNSTitle      = "MCS XNS Network Transport"
ProductMCSXNSSYSDisplayName = "McsXnssys"
ProductMCSXNSSYSTitle   = "MCS XNS Network Transport Driver"
ProductUBNBDisplayName = "MCS Ungermann-Bass NetBIOS Transport"
ProductUBNBTitle        = "MCS Ungermann-Bass NetBIOS Transport"
ProductUBNBSYSDisplayName = "Ubnbsys"
ProductUBNBSYSTitle      = "MCS Ungermann-Bass NetBIOS Transport Driver"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[FileDependentDlgENG]
;
;--- No UI for McsXns
;

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"
; no translation needed for dlgtype
DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlgCantConfigure]
InfoMsgText = "The MCS XNS service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click  OK.  You will then have the opportunity to configure the adapters."

;--------------------------------------------------------------------
;       Get the string to use while doing the install
;--------------------------------------------------------------------
[Billboard1ENG]
Status = "Installing MCS XNS/UB and related services..."


#####oemnadnp.inf all
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NPEISA     = "Network Peripherals FDDI, EISA"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Network Peripherals FDDI EISA Setup"
;
; Software
;
ProductSoftwareDescription      = "Network Peripherals FDDI EISA Driver"
;
; Hardware
;
ProductHardwareDescription      = "Network Peripherals FDDI EISA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "Network Peripherals FDDI, EISA Driver"
ProductHardwareTitle    = "Network Peripherals FDDI Eisa Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for EISA
;

#####nbinfo.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NETBIOS     = "NETBIOS provider"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


ShellCodeErrorTitle     = "Error: NETBIOS Provider"
ShellCodeErrorText      = "Shell Code Error."


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]


#####ncpashel.inf all
;**************************************************************************
;  Language Support
;**************************************************************************
[LanguageID]
   ENG

[LanguageTextENG]
   "English (American)"

;**************************************************************************
; PROGRESS GUAGE VARIABLES: to support file copy operations.
;**************************************************************************

[ProgressCopyENG]
    ProCaption   = "Windows NT Networking Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

    PlatformID_I386 = I386
    PlatformID_Mips = Mips

;----------------------------------------------
; FATAL ERROR DIALOG
;----------------------------------------------
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"
; no translation needed after this
DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1

;----------------------------------------------
; FATAL ERRORS
;----------------------------------------------

[FatalError1ENG]
Error = "Initialization failed"

[FatalError2ENG]
Error = "No INF file name given (NTN_Infname)"

[FatalError3ENG]
Error = "Invocation of INF file "$(!NTN_Infname)" failed"

;
;  These values are based upon SHELL_CODE_OK, SHELL_CODE_NO_SUCH_INF, etc.
;
[ShellError1ENG]
Error = "INF file "$(!NTN_Infname)" does not exist"

[ShellError2ENG]
Error = "INF file "$(!NTN_Infname)" does not have a section named "$(!NTN_InfSection)

[ShellError3ENG]
Error = "INF file "$(!NTN_Infname)", section "$(!NTN_InfSection)" has syntax errors"


;-----------------------------------------------------------------------
;
; ROUTINE:      DoAskOemsetupSource
;
; DESCRIPTION:  This routine prompts the source of OEMSETUP.INF
;
; INPUTS:       $0:  Current Src
;
; OUTPUTS:      $R0: STATUS:   STATUS_SUCCESSFUL |
;                              STATUS_USERCANCEL |
;                              STATUS_FAILED
;
;               $R1: Diskette Src
;
;               $R2: Drive to Free or "" if none
;
;               $R3: Actual string returned from dialog
;
;------------------------------------------------------------------------

[DoAskUpgradeSrcDlgTextENG]
    DlgText        = "Please enter the full path for the upgrade/update "+
                     "OEMSETUP.INF file. Then choose Continue."

[IncorrectOemsetupDiskENG]
    ErrorText      = "Update aborted. The OEMSETUP.INF does not support upgrade for the specified component."


#####netdtect.inf all
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NCDETECT = "Netcard Auto-detection Driver and DLLs"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Netcard Auto-detection Driver Setup"
;
; Software
;
ProductSoftwareTitle = "Netcard Auto-detection Driver"
ProductVersion = "1.0"
ServiceDisplayName = "NetDetect"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI; sigh.
;

#####oemnadd1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DEC100     = "DEC EtherWORKS LC Adapter"
    DEC101     = "DEC EtherWORKS Turbo/LC Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitleDEC100   = "DEC EtherWORKS LC Adapter Card Setup"
FunctionTitleDEC101   = "DEC EtherWORKS Turbo/LC Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "DEC Lance Adapter Driver"
;
; Hardware
;
ProductHardwareDEC100Description        = "DEC EtherWORKS LC Adapter"
ProductHardwareDEC101Description        = "DEC EtherWORKS Turbo/LC Adapter"
ProductSoftwareTitle    = "DEC Lance Adapter Driver"
ProductHardwareDEC100Title      = "DEC EtherWORKS LC Adapter"
ProductHardwareDEC101Title      = "DEC EtherWORKS Turbo/LC Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle$(Option))
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Label1 = "&IRQ Level:"
Label2 = "&Memory Base Address:"
Group1 = "I/O Port Base Address"

Radio1 = "&Primary"
Radio2 = "&Secondary"

; no translation need after this
DlgType = "RadioCombination"
DlgTemplate = "DEC_SETUP"
Caption = $(FunctionTitle$(Option))

CBOptionGreyed = {}
RadioOptionGreyed = {}

RadioIn = {$(IOBaseChoice)}

Combo1List = $(IRQ_List)
Combo1Out  = $(IRQLevel)

Combo2List = $(MemBaseAddrHexList)
Combo2Out  = $(MemBaseAddrHex)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADD1_INS)

#####oemnadd2.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DECETHERWORKSTURBO     = "DEC EtherWORKS Turbo Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

;
; Product Info
;
FunctionTitle   = "DEC EtherWORKS Turbo Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "DEC Lance Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "DEC EtherWORKS Turbo Adapter"
ProductSoftwareTitle    = "DEC Lance Adapter Driver"
ProductHardwareTitle    = "DEC EtherWORKS Turbo Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Label1 = "&IRQ Level:"
Label2 = "&Memory Base Address:"
Group1 = "I/O Port Base Address"

Radio1 = "&Primary"
Radio2 = "&Secondary"

; no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "DEC_SETUP"
Caption = $(FunctionTitle)

CBOptionGreyed = {}
RadioOptionGreyed = {}

RadioIn = {$(IOBaseChoice)}

Combo1List = $(IRQ_List)
Combo1Out  = $(IRQLevel)

Combo2List = $(MemBaseAddrHexList)
Combo2Out  = $(MemBaseAddrHex)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADD2_INS)

#####oemnadd4.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DEC422     = "DEC EtherWORKS Turbo EISA Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "DEC EtherWORKS Turbo EISA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "DEC Lance Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "DEC EtherWORKS Turbo EISA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"
ProductSoftwareTitle    = "DEC Lance Adapter Driver"
ProductHardwareTitle    = "DEC EtherWORKS Turbo EISA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for EISA
;

#####oemnadde.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DECSTAT     = "DEC Turbo Channel Ethernet Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "DEC Turbo Channel Setup"
;
; Software
;
ProductSoftwareDescription      = "DEC Lance Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "DEC Turbo Channel Ethernet Adapter"

ProductSoftwareTitle    = "DEC Lance Adapter Driver"
ProductHardwareTitle    = "DEC Turbo Channel Ethernet Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[DecstationDlgENG]
Label1 = "&Slot Number:"

;no translation needed after this

DlgType = "MultiCombo"
DlgTemplate = "SINGLE_COMBO"
Caption = $(FunctionTitle)

Combo1List = $(SlotList)
Combo1Out  = $(SlotNum)

ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}

HelpContext = $(!IDH_DB_OEMNADDE_INS)

#####oemnaddi.inf all

[OptionsTextENG]
    PCIMACISA     = "DigiBoard PCIMAC - ISA Adapter"
    PCIMAC/4      = "DigiBoard PCIMAC/4 Adapter"
;    PCIMACMC      = "DigiBoard PCIMAC - MC Adapter"

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

;
; Product Info
;
FunctionTitle   = "DigiBoard ISDN Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "DigiBoard ISDN Adapter Driver"
;
; Hardware
;
ProductHardwarePCIMACDescription        = "DigiBoard ISDN Adapter"

[InvokeRasDlgENG]
InvokeRasSetupMsg = "DigiBoard ISDN setup is complete. "+
                    "Remote Access Services (RAS) will now be installed. "+
                    "Please configure one or more ISDN ports in RAS setup "+
                    "to enable you to use RAS over ISDN." 
InvokeRasConfigMsg = "DigiBoard ISDN setup is complete. "+
                     "Remote Access Services (RAS) setup will now be invoked. "+
                     "Please configure one or more ISDN ports in RAS setup "+
                     "to enable you to use RAS over ISDN." 
InvokeRasError =  "DigiBoard ISDN setup encountered an error while invoking "+
                  "the RAS setup INF file (OEMNSVRA.INF). "+
                  "Please make sure that the file is present in the system32 "+
                  "directory and is the proper file." 

#####oemnaddp.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DECPC     = "DEC EtherWORKS DEPCA"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "DEC EtherWORKS DEPCA Setup"
;
; Software
;
ProductSoftwareDescription      = "DEC Lance Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "DEC EtherWORKS DEPCA"
ProductSoftwareTitle    = "DEC Lance Adapter Driver"
ProductHardwareTitle    = "DEC EtherWORKS DEPCA"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

#####oemnadds.inf all

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DigiBoardCX     = "DigiBoard C/X Adapter"
    DigiBoardXem    = "DigiBoard PC/Xem Adapter"
    DigiBoard8r     = "DigiBoard AccelePort 8 Adapter"
    IBM8r           = "IBM 8-Port Async, EIA-232 (ISA) Adapter"
    DigiBoard8i     = "DigiBoard PC/8i Adapter"
    DigiBoard16i    = "DigiBoard PC/16i Adapter"
    DigiBoard2Port  = "DigiBoard PC/2e (8K) Adapter"
    DigiBoard4Port  = "DigiBoard PC/4e (8K) Adapter"
    DigiBoard8Port  = "DigiBoard PC/8e (8K) Adapter"
    DigiBoard4e     = "DigiBoard PC/4e Adapter"
    DigiBoard8e     = "DigiBoard PC/8e Adapter"
    DigiBoard16e    = "DigiBoard PC/16e Adapter"
    DigiBoardEPC    = "DigiBoard EPC Adapter"
    StarGateClusStar = "StarGate ClusStar Adapter"

[OptionsTextMCAENG]
    DigiBoardCX     = "DigiBoard MC C/X Adapter"
    DigiBoardXem    = "DigiBoard MC/Xem Adapter"
    DigiBoard8r     = "DigiBoard MC AccelePort 8 Adapter"
    DigiBoard4i     = "DigiBoard MC/4i Adapter"
    DigiBoard8i     = "DigiBoard MC/8i Adapter"
    DigiBoard16i    = "DigiBoard MC/16i Adapter"
    DigiBoard2Port  = "DigiBoard MC/2e (8K) Adapter"
    DigiBoard4Port  = "DigiBoard MC/4e (8K) Adapter"
    DigiBoard8Port  = "DigiBoard MC/8e (8K) Adapter"
    DigiBoardEPC    = "DigiBoard MC EPC Adapter"
    StarGateClusStar = "StarGate MC ClusStar Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
    ProCaption   = $(ManufacturerDisplayName)" "$(AdapterTitle)" Adapter Setup"
    ProCancel    = "Cance&l"
    ProCancelMsg = $(ManufacturerDisplayName)" Adapters and/or Drivers are not correctly installed. "+
                   "Are you sure you want to cancel copying files?"
    ProCancelCap = $(ProCaption)
    ProText1     = "Copying:"
    ProText2     = "To:"
    Error         = "Unable to determine proper source disk location; copy cannot be performed."
;
; Product Info
;
    FunctionTitle = $(ProCaption)
;
; Software
;
    ProductSoftwareDescription          = $(ManufacturerDisplayName)" FEP 5 Adapter Driver"
    ProductSoftwareDescriptionHdwDriver = $(ManufacturerDisplayName)" "$(AdapterTitle)" Miniport Driver"
    ProductSoftwareTitle    = $(ManufacturerDisplayName)" FEP 5 Driver"
    ProductSoftwareTitleHdwDriver = $(ManufacturerDisplayName)" "$(AdapterTitle)" Miniport Driver"

;
; Configuration Information
;
   ConfigurationTitle = $(ProCaption)
   IRQDisableLabel = "Disabled"

;
; Hardware
;
    ProductHardwareDescription      = $(ManufacturerDisplayName)" "$(AdapterTitle)" Adapter"
    ProductHardwareTitle        = $(ManufacturerDisplayName)" "$(AdapterTitle)" Adapter"

[DialogConstantsENG]
;
; Common button names, etc.
;
    Help        = "&Help"
    Exit        = "E&xit"
    OK          = "OK"
    HelpContext = ""
    Continue    = "C&ontinue"
    Cancel      = "C&ancel"

[UpdatingConfigurationENG]
    UpdatingConfiguration      = "Updating new configuration..."

[AbortMessageENG]
  AbortText  =  "Aborting "$(ManufacturerDisplayName)" Setup. Please reboot the system "+
                "to fix the problem."


#####oemnade1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNK16     = "3Com Etherlink16/EtherLink16 TP Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "3Com Etherlink 16 Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com Etherlink16/Etherlink16 TP Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "3Com Etherlink16/Etherlink16 TP Adapter"
ProductSoftwareTitle    = "3Com Etherlink16/Etherlink16 TP Adapter Driver"
ProductHardwareTitle    = "3Com Etherlink16/Etherlink16 TP Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Caption = $(FunctionTitle)

Combo1Label = "&IRQ Level:"
Combo2Label = "I/O &Port Address:"
Label1 = "Transceiver Type"
Radio1 = "&External"
Radio2 = "O&n Board"
CheckBox1 = "&Zero Wait State"
Combo3Label = "&Memory Address:"
Combo4Label = "Memo&ry Size:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "ELNK_16"

Combo1Out  = $(IRQ_Level)
Combo1List = $(IRQ_List)
Combo2List = $(IOADDR_Hex_List)
Combo2Out  = $(IOADDR_Hex_Value)
Combo3List = $(MemAddrHexList)
Combo3Out  = $(MemAddrHexValue)
Combo4List = $(MemAddrLengthList)
Combo4Out  = $(MemAddrLength)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO}

HelpContext = $(!IDH_DB_OEMNADE1_INS)

#####oemnade2.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNKII     = "3Com Etherlink II Adapter (also II/16 and II/16 TP)"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "3Com Etherlink II Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com Etherlink II Adapter Driver"
;
; Hardware
;
ProductHardwareELNKIIDescription        = "3Com Etherlink II Adapter"
ProductSoftwareTitle    = "3Com Etherlink II Adapter Driver"
ProductHardwareELNKIITitle = "3Com Etherlink II Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[MemoryMappedChoicesENG]

Map_1 = 1, "ON"
Map_2 = 0, "OFF"


[FileDependentDlgENG]

DlgText = "Please select values for the following fields:"

Combo1Label = "&IRQ Level:"
Combo2Label = "I/O &Port Address:"
CheckBox1   = "&Memory Mapped"
Label1 = "Transceiver Type"

Radio1 = "&External"
Radio2 = "O&n Board"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "ELNK_II"
Caption = $(FunctionTitle)

Combo1List = $(IRQ_List)
Combo1Out  = $(IRQ_Level)
Combo2List = $(IOADDR_Hex_List)
Combo2Out  = $(IOADDR_Hex_Value)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADE2_INS)

#####oemnadin.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    EE16     = "Intel Ether Express 16 LAN Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Intel Ether Express 16 LAN Adapter Setup"
;
; Software
;
ProductSoftwareDescription      = "Intel Ether Express 16 LAN Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Intel Ether Express 16 LAN Adapter"
ProductSoftwareTitle    = "Intel Ether Express 16 LAN Adapter Driver"
ProductHardwareTitle    = "Intel Ether Express 16 LAN Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

IOReadyListShort = { "Late", "Never" }
IOReadyList      = { "Early", "Late", "Never" }
TransceiverList  = {"Thick Net (AUI/DIX)","Thin Net (BNC/COAX)","Twisted-Pair (TPE)"}

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------

[FileDependentDlgENG]
Combo1Label = "&IRQ Level:"
Combo2Label = "I/&O Port Address:"
Combo3Label = "I/O &Channel Ready:"
Combo4Label = "&Transceiver Type:"

EarlyWarning = "Use of the Early setting may cause system failure in some machines. "+
               "Are you sure you wish to continue?"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "EE_16"
Caption = $(FunctionTitle)

Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)
Combo3List = $(IOReadyListDisplay)
Combo3Out  = $(IOReadyValue)
Combo4List = $(TransceiverList)
Combo4Out  = $(TransceiverValue)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADIN_INS)

#####oemnadn2.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NE2000     = "Novell NE2000 Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Novell NE2000 Network Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Novell NE2000 Adapter Driver"
;
; Hardware
;
ProductHardwareNE2000Description        = "Novell NE2000 Adapter"
ProductSoftwareTitle    = "Novell NE2000 Adapter Driver"
ProductHardwareNE2000Title      = "Novell NE2000 Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)

Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADN2_INS)

#####oemnadne.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NE3200     = "Novell NE3200 EISA Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Novell 3200 EISA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Novell 3200 Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Novell NE3200 EISA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "Novell 3200 Adapter Driver"
ProductHardwareTitle    = "Novell NE3200 EISA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for EISA
;

#####oemnads1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SONICEISA     = "Sonic, EISA"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Sonic EISA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Sonic EISA Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Sonic, EISA"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "Sonic EISA Adapter Driver"
ProductHardwareTitle    = "Sonic, EISA"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for EISA
;

#####oemnadnf.inf all
[LanguagesSupported]
    ENG
[OptionsTextENG]
    BONSAI     = "COMPAQ NetFlex-2 DualPort ENET Controller"
    RODAN      = "COMPAQ NetFlex-2 DualPort TR Controller"
    NETFLX     = "COMPAQ NetFlex/NetFlex-2 ENET-TR Controller"
    DURANGO    = "COMPAQ NetFlex-2 TR Controller"
    CPQTOK     = "COMPAQ 32-Bit DualSpeed Token-Ring Controller"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cance&l"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "COMPAQ NetFlex Adapter Card Setup"
ProductSoftwareDescription        = "COMPAQ ENET-TR EISA Driver"
ProductHardwareBONSAIDescription  = "COMPAQ NetFlex-2 DualPort ENET Controller"
ProductHardwareRODANDescription   = "COMPAQ NetFlex-2 DualPort TR Controller"
ProductHardwareNETFLXDescription  = "COMPAQ NetFlex/NetFlex-2 ENET-TR Controller"
ProductHardwareDURANGODescription = "COMPAQ Token-Ring Controllers"
ProductHardwareCPQTOKDescription        = "COMPAQ 32-Bit DualSpeed Token-Ring Controller"
CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"
ProductSoftwareTitle            = "COMPAQ ENET-TR Driver"
ProductHardwareBONSAITitle      = "COMPAQ NetFlex-2 DualPort ENET Controller"
ProductHardwareRODANTitle       = "COMPAQ NetFlex-2 DualPort TR Controller"
ProductHardwareNETFLXTitle      = "COMPAQ NetFlex/NetFlex-2 ENET-TR Controller"
ProductHardwareDURANGOTitle     = "COMPAQ NetFlex-2 TR Controller"
ProductHardwareCPQTOKTitle      = "COMPAQ 32-Bit Token-Ring Controller"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
Edit1Label = "&Network Address:"

;no translation needed after this

DlgType = "Edit"
DlgTemplate = "NETWORK_NUMBER"
Caption = $(FunctionTitle)

HelpContext = $(!IDH_DB_OEMNADNF_INS)

EditTextLim = 17
EditTextIn  = $(NetworkAddress)
EditFocus   = "ALL"
RCCtlFocusOn = 403


#####oemnadp3.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    P1390     = "Proteon p139X Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Proteon p139X Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Proteon Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Proteon p139X Adapter"

ProductSoftwareTitle    = "Proteon Adapter Driver"
ProductHardwareTitle    = "Proteon p139X Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Base Address:"
Label3 = "&DMA Channel:"
Group1 = "Cable &Type"
Group2 = "Card Sp&eed"

Radio1 = "&UTP"
Radio2 = "&STP"
Edit1Label = "&Network Address:"

;no translation needed after this

Radio3 = "&4"
Radio4 = "&16"

DlgType = "RadioCombination"
DlgTemplate = "PROTEON"
Caption = $(FunctionTitle)

CBOptionGreyed = {}
RadioOptionGreyed = {}

Combo1List = $(IRQ_List)
Combo1Out  = $(IRQLevel)

Combo2List = $(IOBaseAddressList)
Combo2Out  = $(IOBaseAddress)

Combo3List = $(DMA_List)
Combo3Out  = $(DMAChannel)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}


EditTextIn = $(NetworkAddress)
EditTextLim = 17
NotifyFields = {NO, NO, NO}
RCCtlFocusOn = 403

HelpContext = $(!IDH_DB_OEMNADP3_INS)

#####oemnadp9.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    P1990     = "Proteon p199X Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Proteon p199X Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Proteon Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Proteon p199X Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductHardwareTitle    = "Proteon p199X Adapter"
ProductSoftwareTitle    = "Proteon Adapter Driver"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Group1 = "Card Speed"
Radio1 = "&4"
Radio2 = "&16"
Edit1Label = "&Network Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "IBM_TOKEN"
Caption = $(FunctionTitle)
ComboListItemsIn = {}
ComboListItemsOut = {}
EditTextLim = 17
EditTextIn = $(NetworkAddress)
Edit1Label = "&Network Address:"

HelpContext = $(!IDH_DB_OEMNADP9_INS)

EditTextLim = 17
EditTextIn  = $(NetworkAddress)
EditFocus   = "ALL"
RCCtlFocusOn = 403

#####oemnadtk.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    IBMTOK     = "IBM Token Ring Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "IBM Token Ring Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "IBM Token Ring Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "IBM Token Ring Adapter"

ProductSoftwareTitle    = "IBM Token Ring Adapter Driver"
ProductHardwareTitle    = "IBM Token Ring Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Group1 = "I/O Port Base Address"
Radio1 = "&Primary"
Radio2 = "&Secondary"
Edit1Label = "&Network Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "IBM_TOKEN"
Caption = $(FunctionTitle)
ComboListItemsIn = {}
ComboListItemsOut = {}
EditTextLim = 17
EditTextIn = $(NetworkAddress)

OptionsGreyed = {}

HelpContext = $(!IDH_DB_OEMNADTK_INS)
RCCtlFocusOn = 403

#####oemnadub.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    UBPC     = "Ungermann-Bass Ethernet NIUpc Adapter"
    UBPCEOTP = "Ungermann-Bass Ethernet NIUpc/EOTP Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Ungermann-Bass Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Ungermann-Bass Adapter Driver"
;
; Hardware
;
ProductHardwareUBPCDescription          = "Ungermann-Bass Ethernet NIUpc Adapter"
ProductHardwareUBPCEOTPDescription      = "Ungermann-Bass Ethernet NIUpc/EOTP Adapter"
ProductHardwareUBPSDescription          = "Ungermann-Bass Ethernet NIUps Adapter"

ProductSoftwareTitle    = "Ungermann-Bass Driver"
ProductHardwareUBPCTitle        = "Ungermann-Bass Ethernet NIUpc Adapter"
ProductHardwareUBPCEOTPTitle    = "Ungermann-Bass Ethernet NIUpc/EOTP Adapter"
ProductHardwareUBPSTitle        = "Ungermann-Bass Ethernet NIUps Adapter"

IRQList  = ^(IRQChoices$(Option), 1)
IRQValues = ^(IRQChoices$(Option), 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
MemMappedWndAddrList = ^(MemMappedWndBaseAddrChoices$(Option), 1)
MemMappedWndAddrValues = ^(MemMappedWndBaseAddrChoices$(Option), 2)

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Label1 = "&Interrupt Number:"
Label2 = "I/O &Port Base Addr:"
Label3 = "&Memory Address:"

;no translation needed after this

DlgType = "Combination"
DlgTemplate = "UBNDIS"
Caption = $(FunctionTitle)

Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrList)
Combo2Out  = $(IOBaseAddrValue)
Combo3List = $(MemMappedWndAddrList)
Combo3Out  = $(MemMappedWndAddrValue)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}

EditTextLim = ""
CBOptionsGreyed = {}

HelpContext = $(!IDH_DB_OEMNADUB_INS)

#####oemnadwd.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SMCISA = "SMC (WD) EtherCard"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "SMC (WD) ISA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "SMC (WD) Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "SMC (WD) ISA Adapter"

ProductSoftwareTitle    = "SMC (WD) Adapter Driver"
ProductHardwareTitle    = "SMC (WD) ISA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Combo1Label = "&IRQ Level:"
Combo2Label = "&Memory Base Address:"
Combo3Label = "I/&O Port Address:"

;no translation needed after this

DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(FunctionTitle)

Combo1List = $(IRQ_List)
Combo1Out  = $(IRQLevel)

Combo2List = $(WinBaseAddressHexList)
Combo2Out  = $(WinBaseAddress)

Combo3List = $(IOBaseAddressHexList)
Combo3Out  = $(IOBaseAddress)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}

EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}

HelpContext = $(!IDH_DB_OEMNADWD_INS)

#####oemnsvf1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    FTPD     = "FTP Server"
;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "FTP Setup"
;
; Software
;
ProductSoftwareDescription      = "FTP Server"
;
; The user needs to install Microsoft TCP/IP before install FTP.
; If TCPIP does not exist in the registry, the inf file will popup this
; message and exit.
;
ProductSoftwareDisplayName      = "FTP Server"
ProductSoftwareTitle            = "FTP Server"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DefaultsENG]
AnonymousUsername = "guest"

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for FTP
;

#####oemnsvnb.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NETBIOS     = "NetBIOS Interface"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "NetBIOS Interface Setup"
;
; Software
;
ProductSoftwareDescription      = "Microsoft NetBIOS Transport Interface"
ProductSoftwareDisplayName = "NetBIOS Interface"
ProductSoftwareTitle    = "NetBIOS Interface"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for NETBIOS
;
[InfoDlgCantConfigure]
InfoMsgTitle = "Information Message"
InfoMsgText = "The NETBIOS service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click OK."

#####oemnsvrp.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    RPCLOCATE   = "RPC Configuration"

[LocatorNamesENG]
LocName1 = "Windows NT Locator"
LocName2 = "DCE Cell Directory Service"

[SecurityNamesENG]
SecName1 = "Windows NT Security Service"
SecName2 = "DCE Security Service"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "RPC Configuration"
;
; Software
;
ProductSoftwareDescription      = "RPC Configuration"
ProductRPCTitle   = "RPC Configuration"
RpcSrvDisplayNameRpcss   = "Remote Procedure Call (RPC) Service"
RpcSrvDisplayNameLocator = "Remote Procedure Call (RPC) Locator"
RpcSrvDisplayNameSSP     = "NT LM Security Support Provider"
RpcSuiteDisplayName      = "Remote Procedure Call Configuration"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[RpcProviderDlgENG]
Caption = "RPC Configuration"

Edit1Label = "Network &Address:"

Combo1Label = "&Name Service Provider:"
Combo2Label = "&Security Service Provider:"
Help        = "&Help"
Continue    = "OK"
Cancel      = "Cancel"

;no translation needed after this

DlgType = Combination
DlgTemplate = "RPCPROVIDE"
EditTextIn = $(NetworkAddress)

EditFocus = "ALL"
EditTextLim = 50

Combo1List  = $(LocatorListboxNames)
Combo1Out   = $(LocatorChosenName)

Combo2List  = $(SecurityListboxNames)
Combo2Out   = $(SecurityChosenName)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

HelpContext = $(!IDH_DB_RPCLOCATE_INS)
ExitState   = "Active"
NotifyFields = { YES }

[NonFatalError1ENG]
NonFatal = "No network address was entered."

[NonFatalError2ENG]
NonFatal = "Network address ignored for Windows NT Locator."

[NonFatalError3ENG]
NonFatal = "The DCE Security Service is not installed on this computer."

#####oemnsvsv.inf all

;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SRV         = "Server"
;   XACTSRV     = "LAN Manager Translator"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Server"
;
; Software
;
ProductSRVDescription           = "Microsoft Windows Server Service"
ProductXACTSRVDescription       = "Microsoft LAN Manager Translator Service"
ProductSRVDisplayName   = "Server"
ProductSRVTitle         = "Server"
ProductXACTDisplayName  = "XactSrv"
ProductSRVSRVDisplayName       = "Srv"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
GroupLabel = "Optimization:"

Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput for File Sharing"
Radio4 = "Ma&ximize Throughput for Network Applications"

CheckBox1 = "Ma&ke Browser Broadcasts to LAN Manager 2.x Clients"

;no translation needed after this

DlgType = "RadioCombination"               ; DON'T NATIONALIZE
DlgTemplate = "LMSERVER"       ; DON'T NATIONALIZE
Caption = $(FunctionTitle)

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
ComboListItemsOut = {}

OptionsGreyed = {}

HelpContext = $(!IDH_DB_OEMNSVSV_INS)

#####oemnsvwk.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    WKSTA       = "Workstation"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

;
; Error Message
;
RemoveBrowserError = "The Browser may not be removed. Use the Services Control Panel Applet to disable the Browser."
UpdateBrowserError = "You must update the Windows Workstation in order to update the Browser."

;
; Product Info
;
FunctionTitle   = "Workstation Services Setup"
;
; Software
;
ProductWKSTADescription         = "Microsoft Windows Workstation Service"
ProductNETLOGONDescription      = "Microsoft Network Authentication Service"
ProductALERTERDescription       = "Microsoft Alerter Service"
ProductBROWSERDescription       = "Microsoft Network Browser Service"
ProductMESSENGERDescription     = "Microsoft Messenger Service"
ProductRDRDescription           = "Microsoft Redirector Service"
ProductREPLDescription          = "Microsoft Directory Replicator Service"
ProductMUPDescription           = "Microsoft MUP Service"
ProviderRDRName                 = "NT Lan Manager"

ProductWKSTADisplayName = "Workstation"
ProductWKSTATitle       = "Workstation"
ProductNETLOGONDisplayName = "Net Logon"
ProductNETLOGONTitle    = "Net Logon"
ProductALERTERDisplayName = "Alerter"
ProductALERTERTitle     = "Alerter"
ProductBROWSERDisplayName = "Computer Browser"
ProductBROWSERTitle     = "Computer Browser"
ProductMESSENGERDisplayName = "Messenger"
ProductMESSENGERTitle   = "Messenger"
ProductRDRDisplayName   = "Rdr"
ProductRDRTitle         = "Redirector"
ProductProviderName = "Microsoft Windows Network"
ProductREPLDisplayName  = "Directory Replicator"
ProductREPLTitle        = "Directory Replicator"
ProductMUPDisplayName   = "Mup"
ProductMUPTitle         = "Mup"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for workstation
;
#####oemnxpdl.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    DLC     = "DLC Protocol"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "DLC Setup"
;
; Software
;
ProductSoftwareDescription      = "DLC System Driver"

ProductSoftwareDisplayName      = "DLC Protocol"
ProductSoftwareTitle    = "DLC Protocol"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for DLC
;

#####oemnxpnb.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NBF     = "NetBEUI Protocol"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "NetBEUI Protocol"
;
; Software
;
ProductSoftwareDescription      = "Microsoft NetBEUI 3.0 Transport"
;
ProductSoftwareDisplayName = "NetBEUI Protocol"
ProductSoftwareTitle    = "NetBEUI Protocol"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
GroupLabel = "Optimization:"

Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"

;no translation needed after this

DlgType = "Radio"               ; DON'T NATIONALIZE
DlgTemplate = "NBF"             ; DON'T NATIONALIZE
Caption = $(FunctionTitle)

OptionsGreyed = {}

HelpContext = $(!IDH_DB_OEMNXPNB_INS)

#####oemnxps1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SNMP     = "SNMP Service"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "SNMP Setup"
;
; Software
;
ProductSoftwareDescription      = "SNMP Net Management Service"
;
; The user needs to install Microsoft TCP/IP before install SNMP.
; If TCPIP does not exist in the registry, the inf file will popup this
; message and exit.
;
ProductSoftwareDisplayName      = "SNMP Service"
ProductSoftwareTitle    = "SNMP Service"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for SNMP
;

#####oemnxpst.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    STREAMS = "Streams Environment"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSTREAMSDescription       = "Streams System Driver"
ProductSTREAMSDisplayName       = "Streams Environment"
ProductSTREAMSTitle     = "Streams Environment"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

StreamsAlreadyInstalled  = "Streams Environment is already installed in the system."
RefCountNotZeroMsg = "The Streams Environment is currently in use by other network protocols. Please removed all streams-based protocols first."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for STREAMS
;

;**************************************************************************
;
; BILLBOARD DIALOG SECTIONS
;
;**************************************************************************
[Billboard1ENG]
Status = "Installing STREAMS and related services..."

#####oemnxpnn.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    TCPIP     = "Old TCP/IP Protocol"
;   TELNET    = "Telnet"
;   NBT       = "RFC NetBIOS"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "TCP/IP Setup"
;
; Software
;
ProductTCPIPDescription         = "TCP/IP System Driver"
ProductNBTDescription           = "NBT System Driver"

ProductTCPIPDisplayName = "TCP/IP Protocol"
ProductTCPIPTitle       = "TCP/IP Protocol"

ProductTCPIPSYSDisplayName = "Tcpipsys"
ProductTCPIPSYSTitle    = "TCP/IP Network Transport Driver"

ProductNBTDisplayName   = "TCP/IP NetBIOS"
ProductNBTTitle         = "TCP/IP NetBIOS"

ProductNBTSYSDisplayName = "Nbtsys"
ProductNBTSYSTitle      = "RFC NetBIOS Driver"

ProductTELNETDisplayName = "Telnet"
ProductTELNETTitle      = "Telnet Networking Support Environment"

ProductTELNETSYSDisplayName = "Telnetsys"
ProductTELNETSYSTitle     = "Telnet Driver"

ProductLOOPDisplayName  = "Loop"
ProductLOOPTitle        = "Loop Support Environment"

ProductLMHOSTSDisplayName = "TCP/IP NetBIOS Helper"
ProductLMHOSTSTitle     = "TCP/IP NetBIOS Helper"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for TCPIP
;
;----------------------------------------------
; INFO DIALOG
;----------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[InfoDlgCantConfigure]
InfoMsgText = "The TCP/IP service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click  OK.  You will then have the opportunity to configure the adapters."

;----------------------------------------------
; WARNING DIALOG
;----------------------------------------------
[WarningDlgENG]
STF_MB_TITLE = "TCP/IP Setup Warning"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;**************************************************************************
;
; BILLBOARD DIALOG SECTIONS
;
;**************************************************************************
[Billboard1ENG]
Status = "Installing TCP/IP and related services..."

[LMHOSTDlgENG]

Caption = "Import LMHOSTS File"
Import = "&Import"

DlgText = "If you want to import an existing LMHOSTS file, enter the directory path where the file is located and choose Import. Otherwise, choose Continue."

;no translation needed after this

DlgType = "Edit"
DlgTemplate = "LMHOST"
EditTextIn = ""

HelpContext = $(!IDH_DB_LMHOST_INS)

[LMHOSTAskSourceStringsENG]
String1 = "Error processing path entered.  Please reenter the path."

String2 = "Setup requires a full path of the Windows NT distribution files.  "+
          "Please reenter the path."

String3 = "Setup failed to find a free drive to use to connect to the "+
          "server specified.  Please free up some drives and try again."

String4 = "Setup failed to connect to the server specified.  Please reenter "+
          "the path."

String5 = "You just typed in a new LMHOSTS file path. Are you sure that you want to use the default LMHOSTS file?"

#####utility.inf all
[AFDVars]
;
; AFD Software data
;
ProductAFDTitle         = "AFD Networking Support Environment"
;
; don't localize the next 3 lines
;
ProductAFDName          = "Afd"
ProductAFDImagePath     = "\SystemRoot\System32\drivers\afd.sys"
ProductAFDSvcType       = "kernelautostart"

;---------------------------------------------
;
;  Section used to build RegistryErrorList$(STF_LANGUAGE)
;
[RegistryErrorsENG]
UNABLE_ACCESS_SOFTWARE_REG,"Unable to access SOFTWARE subtree in Registry"
UNABLE_CREATE_MANUFACTURER_KEY,"Unable to create Manufacturer key in Registry"
UNABLE_OPEN_MICROSOFT_KEY,"Unable to open Microsoft subkey in Registry"
UNABLE_CREATE_PRODUCT_KEY,"Unable to create subkey in Registry for Windows NT"
UNABLE_CREATE_PRODUCT_VERSION,"Unable to create version subkey in Registry for Windows NT"
UNABLE_CREATE_NETRULES_KEY,"Unable to create a NetRules subkey in Registry"
UNABLE_OPEN_HARDWARE_SECTION,"Unable to open HARDWARE subkey in Registry"
UNABLE_OPEN_NETWORKCARD_SECTION,"Unable to open NetworkCards subkey in Registry"
UNABLE_OPEN_EVENTLOG_SUBKEY,"Unable to open Eventlog subkey in Registry"
UNABLE_CREATE_NETCARD_CONFIGURATION,"Unable to create entry for network adapter in Registry"
UNABLE_ACCESS_CONFIGURE_SERVICE,"Unable to access Services subkey in Registry"
UNABLE_CREATE_CONFIGURE_SERVICE,"Unable to create Services subkey in Registry"
UNABLE_CREATE_SERVICE_SUBKEY,"Unable to create Services subkey in Registry"
INVALID_DATA_PASSED,"Invalid data passed to Registry utility routine"
SERVICE_ALREADY_EXISTS,"Registry Service subkey already exists"
OPERATION_UNIMPLEMENTED,"Registry operation UNIMPLEMENTED"
CANNOT_FIND_COMPONENT_SERVICE,"Component service name not found or non-existent"
CANNOT_CONFIGURE_HARDWARE,"Cannot configure the hardware component"
CANNOT_CONFIGURE_SOFTWARE,"Cannot configure the software component"
UNABLE_WRITE_REGISTRY, "Cannot write to registry"
UNABLE_INSTALL, "Installation Error"
PROVIDER_ALREADY_EXISTED, "Provider already exists in Registry"
PROVIDER_ORDER_DOES_NOT_EXIST, "Provider order does not exist in Registry."
TCPIP_NONEXIST_ERROR, "Please install Microsoft TCP/IP before installing SNMP."
TCPIP_NONEXIST_ERROR_FTPD, "Please install Microsoft TCP/IP before installing FTP Server."
NO_BINDING_INFO, "Missing Binding Information. Please click BINDINGS button first."
CANNOT_OPEN_EVENTLOG_KEY, "Cannot open Eventlog subkey in Registry."
CANNOT_CREATE_SNMPPROXYKEY, "Cannot create SNMP Proxy subkey in Registry."
REF_COUNT_NOT_ZERO, "Please remove all related network adapter cards before removing the software driver."
UNABLE_REMOVE_CONFIGURE_SERVICE,"Unable to remove Services subkey for a software driver in Registry"
UNABLE_ACCESS_WINSOCK_MAP_INFO,"Unable to access WinSock mapping information in DLL"
VERIFY_WARNING,"The current netcard parameters are not verifiably correct and may result in usage problems or system failure.  Use them anyway?"
CANNOT_DETECT,"Setup is unable to obtain network adapter information from the associated network adapter DLL files.  Operation cannot continue."
UNABLE_COPY_FILE,"File copy operation failed."
ASK_SOURCE_FAIL,"Failed to obtain source file location."
SETUP_FAIL,"Setup operation failed."
SERVICE_MARKED_FOR_DELETE,"This network component has recently been removed. Please restart your computer before installing it again."
REBOOT_MACHINE_BEFORE_ADD_ADAPTER,"This network component has recently been removed. Please restart your computer before installing it again."
CANT_REMOVE_WKSTA_NTAS,"The Workstation cannot be removed on a Windows NT Domain Controller."
CANT_REMOVE_SERVER_NTAS,"The Server cannot be removed on a Windows NT Domain Controller."
NO_ERROR, ""
DLC_NONEXIST_ERROR, "Please install Microsoft DLC before installing Remoteboot."
NBF_NONEXIST_ERROR, "Please install the NetBEUI protocol before installing Remoteboot."

[RegistryErrorUnknownENG]
Error_Bogus = "UNKNOWN REGISTRY FAILURE"

;
;---------------------------------------------
;
; Section used for version already exists dialog
;

[VerExistedENG]
ver = " ver "
Text = " already exists on the system. Please use [Update] to update the software."

[CardExistedENG]
Text = "A network card of this type is already installed in the system. Do you want to continue?"

;---------------------------------------------

;*************************************************************************
;  end of section  RemoveNetworkProvider
;*************************************************************************

[ProgressCopyENG]
    ProCaption   = "Windows NT Networking Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
    Error        = "Unable to determine proper source disk location; copy cannot be performed."

#####ntlanman.inf all
[UpgradeDialogENG]
    ProCaption   = "Windows NT Networking Upgrade"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly upgrade.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Network Upgrade Message"
    ProText1     = "Copying:"
    ProText2     = "To:"


[ProductTitleWinNtENG]
!NetProductTitle = "Windows NT Workstation"

[ProductTitleLanmanNtENG]
!NetProductTitle = "Windows NT Server"

;***************************************************************************
;   DIALOG HANDLING SECTIONS
;***************************************************************************

;----------------------------------------------
;  Get Primary Protocol
;----------------------------------------------
[QueryProtocolENG]
    Caption     = "Windows NT Setup"
     DlgText    = "To install the selected network protocols, choose Continue or press "+
                  "ENTER."$(!LF)$(!LF)+
                  "To change a selection, clear or select its check box, and "+
                  "then choose Continue or press ENTER."

    Check1Text  = "&NWLink IPX/SPX Compatible Transport"
    Check2Text  = "&TCP/IP Transport"
    Check3Text  = "Net&BEUI Transport"

    Continue      = "Continue"
    Help          = "&Help"

    ; no translation needed after this
    CBOptionsGreyed = {}
    OptionsGreyed = {}
    DlgType     = "Check"
    DlgTemplate = "PROTOCOLOPTIONS"
    HelpContext   = $(!IDH_DB_GET_PROTOCOL)
    CheckItemsIn = { $(CBInstallNWLink),  $(CBInstallTCPIP), $(CBInstallNetBEUI) }


[IconInfoENG]
    NetAdminGroupName = "Network Administration"
    NCADMIN = "Network Client Administrator"


;----------------------------------------------
; w) INFO DIALOG
;----------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;----------------------------------------------
; w) WARNING DIALOG
;----------------------------------------------
[WarningDlgENG]
STF_MB_TITLE = "Network Setup Warning"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[WarningNoNetENG]
ErrorSuffix = "  This error prevented the network from starting."

[WarningNoLmHostsENG]
ErrorSuffix = "  This error prevented the LmHosts service from starting."

[WarningNoBDCReplENG]
ErrorSuffix = " This error prevented replication of the accounts database"+
              " from the Domain Controller."


     ;----------
     ; WARNINGS
     ;----------
[Warning3ENG]
Error = "This will abort network installation."

;----------------------------------------------
; EXIT WINDOWS NT SETUP WARNING - NTLANMAN.INF
;----------------------------------------------
[ExitWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "No network software will be installed.  You can install the network later by "+
               "choosing the Network item in Control Panel.  To return to network installation, "+
               "choose Cancel."


;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[LmExitWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = $(!NetProductTitle)" requires a network interface for its operation.  "+
               "Do you wish to terminate the installation of "$(!NetProductTitle)"?  If so, choose OK."+
               " To return to network installation, choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1


[NoNicWarningDlgENG]
STF_MB_TITLE = $(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "This option indicates that you intend to install an alternate network "+
               "interface later in the installation (such as for Remote Access Services)."+
               "  If this is your intention, choose OK.  Otherwise, choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 2


[WarnInstallRasENG]
Caption     = "Network Adapter Card Detection"
DlgText     =  "Setup did not detect a network card.  If your network is remote "+
               "(such as over telephone lines), Setup can automatically install "+
               "Microsoft Remote Access Services at this time.   Choose Continue "+
               "to pick a network card manually.  Choose Remote to install Remote "+
               "Access Services."

Help        = "&Help"
Exit        = "&Remote"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_CHKRAS)

[NcpaRetryDlgENG]
STF_MB_TITLE = "Network Malfunction"
STF_MB_TEXT  = "The network software failed to start successfully.  "+
               "Choose YES to return the Networks dialog to reconfigure "+
               "the software.  If you choose NO to continue with the installation, "+
               "you will be unable to join a domain at the present time."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 3
STF_MB_ICON  = 4
STF_MB_DEF   = 1
HelpContext = $(!IDH_DB_RETURN_TO_NCPA)


;----------------------------------------------
; y) NONFATAL ERROR DIALOG
;----------------------------------------------
[NonfatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

     ;-------------
     ; NONFATAL ERRORS
     ;-------------

[NonFatalError1ENG]
Error = "Setup cannot function properly unless your enter your Name."

[NonFatalError2ENG]
Error = "Disk Setup not available yet."

[NonFatalError4ENG]
Error = $(NetcardListHolder)"  is not in  "$(NetcardNameList)

[NonFatalError5ENG]
Error = "Setup cannot function properly unless you enter the name requested."

[NonFatalError6ENG]
Error = "No network card was selected."

[NonFatalError7ENG]
Error = "The name entered is invalid."

[NonFatalError8ENG]
Error = "The computer name entered is invalid."

[NonFatalError9ENG]
Error = "The domain name entered is invalid."

[NonFatalError10ENG]
Error = "The workgroup name entered is invalid."

[NonFatalError11ENG]
Error = "The Domain Controller name entered is invalid"

[NonFatalError12ENG]
Error = "Setup failed to configure your Windows16 compatibility "+
        "subsystem.  Ignoring the error."

;----------------------------------------------
; x) FATAL ERROR DIALOG
;----------------------------------------------
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1

     ;-------------
     ; FATAL ERRORS
     ;-------------
[FatalError1ENG]
Error = "Driver load failed: unable to start LanmanWorkstation."

[FatalError4ENG]
Error  = "Setup couldn't modify your computer name."$(!LF)$(!LF)"Cannot proceed with install."

[FatalError9ENG]
Error  = "Setup failed to initialize security on your computer. "+
         "Installation is halted."

[FatalError12ENG]
Error = "Setup was unable to build the user's default configuration file. "+
        "Windows NT cannot log on a user without this file."

[FatalError13ENG]
Error = "Setup was unable to reset the SystemSetupInProgress value to "+
        "indicate Setup completion."

[FatalError14ENG]
Error = "Setup was unable to process the INF file "$(FailedInfFile)" which is required "+
        "for network installation."

[FatalError999ENG]
Error = "Setup has encountered an internal error and must quit."

[ProgressCopyENG]
    ProCaption   = $(!NetProductTitle)" Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = $(!NetProductTitle)" is not correctly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

    PlatformID_I386 = I386
    PlatformID_Mips = Mips

;**************************************************************************
;
; BILLBOARD DIALOG SECTIONS
;
;**************************************************************************
[Billboard1ENG]
Status = "Setup is preparing network card choices..."

[Billboard2ENG]
Status = "Setup is installing the Windows NT Workstation service..."

[Billboard3ENG]
Status = "Setup is installing the Windows NT Server service..."

[Billboard4ENG]
Status = "Setup is installing the NetBEUI transport..."

[Billboard5ENG]
Status = "Setup is installing the NetBIOS service..."

[Billboard6ENG]
Status = "Setup is starting the network..."

[Billboard7ENG]
Status = "Setup is completing the installation of the security system..."

[Billboard8ENG]
Status = "Setup is installing the network card..."

[Billboard9ENG]
Status = "Setup is preparing network software choices..."

[Billboard10ENG]
Status = "Setup is starting the network card detection service..."

[Billboard11ENG]
Status = "Setup is installing the RPC locator services..."

[Billboard12ENG]
Status = "Setup is installing the Remote Access services..."

[Billboard13ENG]
Status = "Upgrading network components..."

[Billboard14ENG]
Status = "Setup is installing the NWLink IPX/SPX Compatible Transport..."

[Billboard15ENG]
Status = "Setup is installing the TCP/IP transport..."

;----------------------------------------------
;  Get Primary Adapter Type NTLANMAN.INF
;----------------------------------------------
[QueryAdapterENG]
Caption     = "Add Network Adapter"
;  Text for WindowsNT primary installation
DlgText     = "Setup needs to know which type of network adapter card "+
              "is installed in your computer. If you do not want to install "+
              "the network, or do not have a network adapter, choose No Network."+
              "  If you have more than one network card, you can install others"+
              " from the Network icon of the Control Panel."

;  Text for secondary installation
DlgText2    = "Network Setup needs to know which type of network adapter card "+
              "is to be installed in your computer. If you do not want to install "+
              "a network adapter, press CANCEL."

;  Text for Server primary installation
DlgTextLm   = "Setup needs to know which type of network adapter card "+
              "is installed in your computer."+
              "   If you have more than one network card, you can install others"+
              " from the Network icon of the Control Panel."

Combo1Label = "&Network Adapter Card:"
Help        = "&Help"
Exit        = "Cancel"
ExitNoNet   = "N&o Network"
ExitSetup   = "E&xit Setup"
Continue    = "Continue"
Cancel      = "Cancel"

;no translation needed after this

DlgType     = Combination
DlgTemplate = "ADAP_PROTO_COMBO"
EditFocus = "ALL"

; Combo boxes in the dialog
Combo1List  = $(AdapterOptionTextList)
Combo1Out   = *($(Combo1List), ~($(AdapterOptionList), $(AdapterOption)))

ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}

NotifyFields      = {NO}

HelpContext = $(!IDH_DB_CARDSELECTION_INS)
ExitState   = "Active"

OptionalDlgText = "Please choose a network adapter driver."

[OemOptionDisketteENG]
   DO_COPY                       = "YES"

   AdapterDisketteSrc = "A:\"
   OemSoftDisketteSrc = "A:\"

[StringsENG]
    Other  = "<Other> Requires disk from manufacturer"
    None   = "<None>  Network interface to be chosen later"
    Error1 = "Failed to initialize adapter options."
    Error2 = "Failed to initialize display variables."
    Error3 = "Failed to obtain new options.  Ignoring the error."
    Error4 = "Internal Setup error: failed to merge Microsoft options with the OEM options."
    Error5 = "You must select at least one Network Transport."
    Error6 = ""

;----------------------------------------------
;  Get OEM Software Option
;----------------------------------------------

[QueryOemSoftENG]
Caption     = "Add Network Software"
DlgText     = "Select the software component you want to install; use <Other>  "+
              "if you have a disk from the vendor."
Combo1Label = "&Network Software:"
Help        = "&Help"
Exit        = "Cancel"
Continue    = "Continue"
Cancel      = "Cancel"

;no translation needed after this

DlgType     = Combination
DlgTemplate = "ADAP_PROTO_COMBO"
EditFocus = "ALL"

; Combo boxes in the dialog
Combo1List  = $(OemSoftOptionTextList)
Combo1Out   = *($(Combo1List), ~($(OemSoftOptionList), $(OemSoftOption)))

ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}

NotifyFields      = {NO}

HelpContext = $(!IDH_DB_SOFTSELECTION_INS)
ExitState   = "Active"
OptionalDlgText = "Please choose a network software component."

[WarnDetectDlgENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup can automatically detect and install network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to have Setup attempt to detect your adapter card "+
              "or choose Do Not Detect to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_BYPASS)

[WarnDetectAcceptENG]
Caption     = "Network Adapter Card Detection"
DlgText1    = "Setup has detected the following network adapter card in your computer:"

DlgText2    = "Choose Continue to set up this adapter card, choose Find Next "+
              "to have Setup attempt to detect a different adapter card or choose "+
              "Do Not Detect if you want to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"
Cancel      = "&Find Next"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NCFOUND"
HelpContext = $(!IDH_DB_DETECT_FOUND)

[WarnDetectFailENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup did not detect any other network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to return to a previously detected adapter card."

Help        = "&Help"
Continue    = "Continue"
Exit        = "&Detect"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_FAILED)

[WarnDetectFail2ENG]
DlgText     = "Setup did not detect any network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to retry the detection operation."



#####ntlminst.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    LANMAN      = "Windows NT Networking Services"

[ProductTitleWinNtENG]
!NetProductTitle = "Windows NT Workstation"

[ProductTitleLanmanNtENG]
!NetProductTitle = "Windows NT Server"

[UpgradeDialogENG]
    ProCaption   = "Windows NT Networking Upgrade"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly upgrade.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Network Upgrade Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

;***************************************************************************
;   DIALOG HANDLING SECTIONS
;***************************************************************************

;----------------------------------------------
;  Get Primary Protocol
;----------------------------------------------
[QueryProtocolENG]
    Caption     = "Windows NT Setup"
     DlgText    = "To install the selected network protocols, choose Continue or press "+
                  "ENTER."$(!LF)$(!LF)+
                  "To change a selection, clear or select its check box, and "+
                  "then choose Continue or press ENTER."

    Check1Text  = "&NWLink IPX/SPX Compatible Transport"
    Check2Text  = "&TCP/IP Transport"
    Check3Text  = "Net&BEUI Transport"

    Continue      = "Continue"
    Help          = "&Help"

    ; no translation needed after this
    CBOptionsGreyed = {}
    OptionsGreyed = {}
    DlgType     = "Check"
    DlgTemplate = "PROTOCOLOPTIONS"
    HelpContext   = $(!IDH_DB_GET_PROTOCOL)
    CheckItemsIn = { $(CBInstallNWLink),  $(CBInstallTCPIP), $(CBInstallNetBEUI) }

[IconInfoENG]
    NetAdminGroupName = "Network Administration"
    NCADMIN = "Network Client Administrator"



[TimeZone]
  TimeZoneName = "Pacific Time"

;--------------------------------------------------------------
; SETUP NOT DONE - RESTART DIALOG
;--------------------------------------------------------------
[SetupNotDoneDlgENG]
    Caption     = $(!NetProductTitle)" Setup"
    DlgText     = $(!NetProductTitle)" has not been installed."$(!LF)$(!LF)+
                  "Please remove any floppy disks from the floppy disk drives and "+
                  "choose Restart Computer to run Setup again."

    Reboot      = "&Restart Computer"
    Windows     = "E&xit to "$(!NetProductTitle)

    ;no translation needed after this

    DlgType     = "Info"
    DlgTemplate = "REBOOT"

;--------------------------------------------------------------
; SETUP DONE - REBOOT DIALOG
;--------------------------------------------------------------
[SetupDoneDlgENG]
    Caption     = $(!NetProductTitle)" Networking Setup"
    DlgText     = $(!NetProductTitle)" Networking is now installed."$(!LF)$(!LF)+
                  "Please remove any floppy disks from the floppy disk drives, "+
                  "close any other applications and "+
                  "choose Restart Computer to restart the system."
    Reboot      = "&Restart Computer"
    Windows     = "E&xit to "$(!NetProductTitle)

    ;no translation needed after this

    DlgType     = "Info"
    DlgTemplate = "REBOOT"

;----------------------------------------------
; w) INFO DIALOG
;----------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;----------------------------------------------
; w) WARNING DIALOG
;----------------------------------------------
[WarningDlgENG]
STF_MB_TITLE = "Network Setup Warning"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[WarningNoNetENG]
ErrorSuffix = "  This error prevented the network from starting."
[WarningNoLmHostsENG]
ErrorSuffix = "  This error prevented the LmHosts service from starting."
[WarningNoBDCReplENG]
ErrorSuffix = " This error prevented replication of the accounts database"+
              " from the Domain Controller."

[ExitNwkWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "Are you sure you want to discontinue network installation?"

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[ExitAndRemoveLmDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "Some Windows NT Networking components appear to be installed already.  "+
               "Please use the Control Panel Networks function to remove them before "+
               "attempting reinstallation."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1

     ;----------
     ; WARNINGS
     ;----------
[Warning3ENG]
Error = "This will abort network installation."

;----------------------------------------------
; EXIT WINDOWS NT SETUP WARNING - NTLMINST.INF
;----------------------------------------------
[ExitWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "Networking support is not installed.  "+
               "Are you sure you want to discontinue network installation?"

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1


[NoNicWarningDlgENG]
STF_MB_TITLE = $(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "This option indicates that you intend to install an alternate network "+
               "interface later in the installation (such as for Remote Access Services)."+
               "  If this is your intention, choose OK.  Otherwise, choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 2


[WarnInstallRasENG]
Caption     = "Network Adapter Card Detection"
DlgText     =  "Setup did not detect a network card.  If your network is remote "+
               "(such as over telephone lines), Setup can automatically install "+
               "Microsoft Remote Access Services at this time.   Choose Continue "+
               "to pick a network card manually.  Choose Remote to install Remote "+
               "Access Services."

Help        = "&Help"
Exit        = "&Remote"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_CHKRAS)

[NcpaRetryDlgENG]
STF_MB_TITLE = "Network Malfunction"
STF_MB_TEXT  = "The network software failed to start successfully.  "+
               "Choose YES to return the Networks dialog to reconfigure "+
               "the software.  If you choose NO to continue with the installation, "+
               "you will be unable to join a domain at the present time."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 3
STF_MB_ICON  = 4
STF_MB_DEF   = 1
HelpContext = $(!IDH_DB_RETURN_TO_NCPA)

;----------------------------------------------
; y) NONFATAL ERROR DIALOG
;----------------------------------------------
[NonfatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

     ;-------------
     ; NONFATAL ERRORS
     ;-------------

[NonFatalError1ENG]
Error = "Setup cannot function properly unless your enter your Name."

[NonFatalError2ENG]
Error = "Disk Setup not available yet."

[NonFatalError4ENG]
Error = $(NetcardListHolder)"  is not in  "$(NetcardNameList)

[NonFatalError5ENG]
Error = "Setup cannot function properly unless you enter the name requested."

[NonFatalError6ENG]
Error = "No network card was selected."

[NonFatalError7ENG]
Error = "The name entered is invalid."

[NonFatalError8ENG]
Error = "The computer name entered is invalid."

[NonFatalError9ENG]
Error = "The domain name entered is invalid."

[NonFatalError10ENG]
Error = "The workgroup name entered is invalid."

[NonFatalError11ENG]
Error = "The Domain Controller name entered is invalid"

[NonFatalError12ENG]
Error = "Setup failed to configure your Windows16 compatibility "+
        "subsystem.  Ignoring the error."

;----------------------------------------------
; x) FATAL ERROR DIALOG
;----------------------------------------------
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1

     ;-------------
     ; FATAL ERRORS
     ;-------------
[FatalError1ENG]
Error = "Driver load failed: unable to start LanmanWorkstation."

[FatalError4ENG]
Error  = "Setup couldn't modify your computer name."$(!LF)$(!LF)"Cannot proceed with install."

[FatalError9ENG]
Error  = "Setup failed to initialize security on your computer. "+
         "Installation is halted."

[FatalError12ENG]
Error = "Setup was unable to build the user's default configuration file. "+
        "Windows NT cannot log on a user without this file."

[FatalError13ENG]
Error = "Setup was unable to reset the SystemSetupInProgress value to "+
        "indicate Setup completion."

[FatalError14ENG]
Error = "Setup was unable to process the INF file "$(FailedInfFile)" which is required "+
        "for network installation."

[FatalError999ENG]
Error = "Setup has encountered an internal error and must quit."

[ProgressCopyENG]
    ProCaption   = $(!NetProductTitle)" Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = $(!NetProductTitle)" is not correctly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

    PlatformID_I386 = I386
    PlatformID_Mips = Mips

;**************************************************************************
;
; BILLBOARD DIALOG SECTIONS
;
;**************************************************************************
[Billboard1ENG]
Status = "Setup is preparing network card choices..."

[Billboard2ENG]
Status = "Setup is installing the Windows NT Workstation service..."

[Billboard3ENG]
Status = "Setup is installing the Windows NT Server service..."

[Billboard4ENG]
Status = "Setup is installing the NetBEUI transport..."

[Billboard5ENG]
Status = "Setup is installing the NetBIOS service..."

[Billboard6ENG]
Status = "Setup is starting the network..."

[Billboard7ENG]
Status = "Setup is completing the installation of the security system..."

[Billboard8ENG]
Status = "Setup is installing the network card..."

[Billboard9ENG]
Status = "Setup is preparing network software choices..."

[Billboard10ENG]
Status = "Setup is starting the network card detection service..."

[Billboard11ENG]
Status = "Setup is installing the RPC locator services..."

[Billboard12ENG]
Status = "Setup is installing the Remote Access services..."

[Billboard13ENG]
Status = "Upgrading network components..."

[Billboard14ENG]
Status = "Setup is installing the NWLink IPX/SPX Compatible Transport..."

[Billboard15ENG]
Status = "Setup is installing the TCP/IP transport..."

;----------------------------------------------
;  Get Primary Adapter Type
;----------------------------------------------
[QueryAdapterENG]
Caption     = "Add Network Adapter"
DlgText     = "Setup needs to know which type of network adapter card "+
              "is installed in your computer. If you do not want to install "+
              "the network, or do not have a network adapter, choose No Network."+
              "  If you have more than one network card, you can install others"+
              " from the Network icon of the Control Panel."
Combo1Label = "&Network Adapter Card:"
Help        = "&Help"
Exit        = "Cancel"
ExitNoNet   = "N&o Network"
ExitSetup   = "E&xit Setup"
Continue    = "Continue"
Cancel      = "Cancel"

;no translation needed after this

DlgType     = Combination
DlgTemplate = "ADAP_PROTO_COMBO"
EditFocus = "ALL"

; Combo boxes in the dialog
Combo1List  = $(AdapterOptionTextList)
Combo1Out   = *($(Combo1List), ~($(AdapterOptionList), $(AdapterOption)))

ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}

NotifyFields      = {NO}

HelpContext = $(!IDH_DB_CARDSELECTION_INS)
ExitState   = "Active"
OptionalDlgText = "Please choose a network adapter driver."

[OemOptionDisketteENG]
   DO_COPY                       = "YES"

   AdapterDisketteSrc = "A:\"
   OemSoftDisketteSrc = "A:\"

[StringsENG]
    Other  = "<Other> Requires disk from manufacturer"
    None   = "<None>  Network interface to be chosen later"
    Error1 = "Failed to initialize adapter options."
    Error2 = "Failed to initialize display variables."
    Error3 = "Failed to obtain new options.  Ignoring the error."
    Error4 = "Internal Setup error: failed to merge Microsoft options with the OEM options."
    Error5 = "You must select at least one Network Transport."
    Error6 = ""

[WarnDetectDlgENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup can automatically detect and install network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to have Setup attempt to detect your adapter card "+
              "or choose Do Not Detect to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_BYPASS)

[WarnDetectAcceptENG]
Caption     = "Network Adapter Card Detection"
DlgText1    = "Setup has detected the following network adapter card in your computer:"

DlgText2    = "Choose Continue to set up this adapter card, choose Find Next "+
              "to have Setup attempt to detect a different adapter card or choose "+
              "Do Not Detect if you want to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"
Cancel      = "&Find Next"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NCFOUND"
HelpContext = $(!IDH_DB_DETECT_FOUND)

[WarnDetectFailENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup did not detect any other network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to return to a previously detected adapter card."

Help        = "&Help"
Continue    = "Continue"
Exit        = "&Detect"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_FAILED)

[WarnDetectFail2ENG]
DlgText     = "Setup did not detect any network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to retry the detection operation."



#####ntidwnet.inf all
[UpgradeDialogENG]
    ProCaption   = "Windows NT Networking Upgrade"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly upgrade.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Network Upgrade Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

[ProductTitleWinNtENG]
!NetProductTitle = "Windows NT Workstation"

[ProductTitleLanmanNtENG]
!NetProductTitle = "Windows NT Server"

;***************************************************************************
;   DIALOG HANDLING SECTIONS
;***************************************************************************

;----------------------------------------------
;  Get Primary Protocol
;----------------------------------------------
[QueryProtocolENG]
    Caption     = "Windows NT Setup"
     DlgText    = "To install the selected network protocols, choose Continue or press "+
                  "ENTER."$(!LF)$(!LF)+
                  "To change a selection, clear or select its check box, and "+
                  "then choose Continue or press ENTER."

    Check1Text  = "&NWLink IPX/SPX Compatible Transport"
    Check2Text  = "&TCP/IP Transport"
    Check3Text  = "Net&BEUI Transport"

    Continue      = "Continue"
    Help          = "&Help"

    ; no translation needed after this
    CBOptionsGreyed = {}
    OptionsGreyed = {}
    DlgType     = "Check"
    DlgTemplate = "PROTOCOLOPTIONS"
    HelpContext   = $(!IDH_DB_GET_PROTOCOL)
    CheckItemsIn = { $(CBInstallNWLink),  $(CBInstallTCPIP), $(CBInstallNetBEUI) }


[IconInfoENG]
    NetAdminGroupName = "Network Administration"
    NCADMIN = "Network Client Administrator"


[TimeZone]
  TimeZoneName = "Pacific Time"

;--------------------------------------------------------------
; SETUP NOT DONE - RESTART DIALOG
;--------------------------------------------------------------
[SetupNotDoneDlgENG]
    Caption     = $(!NetProductTitle)" Setup"
    DlgText     = $(!NetProductTitle)" has not been installed."$(!LF)$(!LF)+
                  "Please remove any floppy disks from the floppy disk drives and "+
                  "choose Restart Computer to run Setup again."

    Reboot      = "&Restart Computer"
    Windows     = "E&xit to "$(!NetProductTitle)

    ;no translation needed after this

    DlgType     = "Info"
    DlgTemplate = "REBOOT"

;--------------------------------------------------------------
; SETUP DONE - REBOOT DIALOG
;--------------------------------------------------------------
[SetupDoneDlgENG]
    Caption     = $(!NetProductTitle)" Networking Setup"

    DlgText     = $(!NetProductTitle)" Networking is now installed."$(!LF)$(!LF)+
                  "Please remove any floppy disks from the floppy disk drives and "+
                  "choose Restart Computer to run the installed system."
    Reboot      = "&Restart Computer"
    Windows     = "E&xit to "$(!NetProductTitle)

    ;no translation needed after this

    DlgType     = "Info"
    DlgTemplate = "REBOOT"

;----------------------------------------------
; w) INFO DIALOG
;----------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;----------------------------------------------
; w) WARNING DIALOG
;----------------------------------------------
[WarningDlgENG]
STF_MB_TITLE = "Network Setup Warning"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[WarningNoNetENG]
ErrorSuffix = "  This error prevented the network from starting."
[WarningNoLmHostsENG]
ErrorSuffix = "  This error prevented the LmHosts service from starting."
[WarningNoBDCReplENG]
ErrorSuffix = " This error prevented replication of the accounts database"+
              " from the Domain Controller."


     ;----------
     ; WARNINGS
     ;----------
[Warning3ENG]
Error = "This will abort network installation."

;----------------------------------------------
; EXIT WINDOWS NT SETUP WARNING - NTIDWNET.INF
;----------------------------------------------
[ExitWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "No network software will be installed.  You can install the network later by "+
               "choosing the Network item in Control Panel.  To return to network installation, "+
               "choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1

[LmExitWarningDlgENG]
STF_MB_TITLE = "Exit "$(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = $(!NetProductTitle)" requires a network interface for its operation.  "+
               "Do you wish to terminate the installation of "$(!NetProductTitle)"?  If so, choose OK."+
               " To return to network installation, choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 1


[NoNicWarningDlgENG]
STF_MB_TITLE = $(!NetProductTitle)" Networking Setup"
STF_MB_TEXT  = "This option indicates that you intend to install an alternate network "+
               "interface later in the installation (such as for Remote Access Services)."+
               "  If this is your intention, choose OK.  Otherwise, choose Cancel."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 2
STF_MB_ICON  = 5
STF_MB_DEF   = 2


[WarnInstallRasENG]
Caption     = "Network Adapter Card Detection"
DlgText     =  "Setup did not detect a network card.  If your network is remote "+
               "(such as over telephone lines), Setup can automatically install "+
               "Microsoft Remote Access Services at this time.   Choose Continue "+
               "to pick a network card manually.  Choose Remote to install Remote "+
               "Access Services."

Help        = "&Help"
Exit        = "&Remote"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_CHKRAS)

[NcpaRetryDlgENG]
STF_MB_TITLE = "Network Malfunction"
STF_MB_TEXT  = "The network software failed to start successfully.  "+
               "Choose YES to return the Networks dialog to reconfigure "+
               "the software.  If you choose NO to continue with the installation, "+
               "you will be unable to join a domain at the present time."

;no translation needed after this

DlgType      = "MessageBox"
STF_MB_TYPE  = 3
STF_MB_ICON  = 4
STF_MB_DEF   = 1
HelpContext = $(!IDH_DB_RETURN_TO_NCPA)

;----------------------------------------------
; y) NONFATAL ERROR DIALOG
;----------------------------------------------
[NonfatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

     ;-------------
     ; NONFATAL ERRORS
     ;-------------

[NonFatalError1ENG]
Error = "Setup cannot function properly unless your enter your Name."

[NonFatalError2ENG]
Error = "Disk Setup not available yet."

[NonFatalError4ENG]
Error = $(NetcardListHolder)"  is not in  "$(NetcardNameList)

[NonFatalError5ENG]
Error = "Setup cannot function properly unless you enter the name requested."

[NonFatalError6ENG]
Error = "No network card was selected."

[NonFatalError7ENG]
Error = "The name entered is invalid."

[NonFatalError8ENG]
Error = "The computer name entered is invalid."

[NonFatalError9ENG]
Error = "The domain name entered is invalid."

[NonFatalError10ENG]
Error = "The workgroup name entered is invalid."

[NonFatalError11ENG]
Error = "The Domain Controller name entered is invalid"

[NonFatalError12ENG]
Error = "Setup failed to configure your Windows16 compatibility "+
        "subsystem.  Ignoring the error."

;----------------------------------------------
; x) FATAL ERROR DIALOG
;----------------------------------------------
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"

;no translation needed after this

DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1

     ;-------------
     ; FATAL ERRORS
     ;-------------
[FatalError1ENG]
Error = "Driver load failed: unable to start LanmanWorkstation."

[FatalError4ENG]
Error  = "Setup couldn't modify your computer name."$(!LF)$(!LF)"Cannot proceed with install."

[FatalError9ENG]
Error  = "Setup failed to initialize security on your computer. "+
         "Installation is halted."

[FatalError12ENG]
Error = "Setup was unable to build the user's default configuration file. "+
        "Windows NT cannot log on a user without this file."

[FatalError13ENG]
Error = "Setup was unable to reset the SystemSetupInProgress value to "+
        "indicate Setup completion."

[FatalError14ENG]
Error = "Setup was unable to process the INF file "$(FailedInfFile)" which is required "+
        "for network installation."

[FatalError999ENG]
Error = "Setup has encountered an internal error and must quit."

[ProgressCopyENG]
    ProCaption   = $(!NetProductTitle)" Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = $(!NetProductTitle)" is not correctly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

    PlatformID_I386 = I386
    PlatformID_Mips = Mips

;**************************************************************************
;
; BILLBOARD DIALOG SECTIONS
;
;**************************************************************************
[Billboard1ENG]
Status = "Setup is preparing network card choices..."

[Billboard2ENG]
Status = "Setup is installing the Windows NT Workstation service..."

[Billboard3ENG]
Status = "Setup is installing the Windows NT Server service..."

[Billboard4ENG]
Status = "Setup is installing the NetBEUI transport..."

[Billboard5ENG]
Status = "Setup is installing the NetBIOS service..."

[Billboard6ENG]
Status = "Setup is starting the network..."

[Billboard7ENG]
Status = "Setup is completing the installation of the security system..."

[Billboard8ENG]
Status = "Setup is installing the network card..."

[Billboard9ENG]
Status = "Setup is preparing network software choices..."

[Billboard10ENG]
Status = "Setup is starting the network card detection service..."

[Billboard11ENG]
Status = "Setup is installing the RPC locator services..."

[Billboard12ENG]
Status = "Setup is installing the Remote Access services..."

[Billboard13ENG]
Status = "Upgrading network components..."

[Billboard14ENG]
Status = "Setup is installing the NWLink IPX/SPX Compatible Transport..."

[Billboard15ENG]
Status = "Setup is installing the TCP/IP transport..."

;----------------------------------------------
;  Get Primary Adapter Type NTIDWNET.INF
;----------------------------------------------
[QueryAdapterENG]
Caption     = "Add Network Adapter"
DlgText     = "Setup needs to know which type of network adapter card "+
              "is installed in your computer. If you do not want to install "+
              "the network, or do not have a network adapter, choose No Network."+
              "  If you have more than one network card, you can install others"+
              " from the Network icon of the Control Panel."

;  Text for Server primary installation
DlgTextLm   = "Setup needs to know which type of network adapter card "+
              "is installed in your computer."+
              "   If you have more than one network card, you can install others"+
              " from the Network icon of the Control Panel."

Combo1Label = "&Network Adapter Card:"
Help        = "&Help"
Exit        = "Cancel"
ExitNoNet   = "N&o Network"
ExitSetup   = "E&xit Setup"
Continue    = "Continue"
Cancel      = "Cancel"

;no translation needed after this

DlgType     = Combination
DlgTemplate = "ADAP_PROTO_COMBO"
EditFocus = "ALL"

; Combo boxes in the dialog
Combo1List  = $(AdapterOptionTextList)
Combo1Out   = *($(Combo1List), ~($(AdapterOptionList), $(AdapterOption)))

ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}

NotifyFields      = {NO}

HelpContext = $(!IDH_DB_CARDSELECTION_INS)
ExitState   = "Active"
OptionalDlgText = "Please choose a network software component."

[OemOptionDisketteENG]
   DO_COPY                       = "YES"

   AdapterDisketteSrc = "A:\"
   OemSoftDisketteSrc = "A:\"

[StringsENG]
    Other  = "<Other> Requires disk from manufacturer"
    None   = "<None>  Network interface to be chosen later"
    Error1 = "Failed to initialize adapter options."
    Error2 = "Failed to initialize display variables."
    Error3 = "Failed to obtain new options.  Ignoring the error."
    Error4 = "Internal Setup error: failed to merge Microsoft options with the OEM options."
    Error5 = "You must select at least one Network Transport."
    Error6 = ""

[WarnDetectDlgENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup can automatically detect and install network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to have Setup attempt to detect your adapter card "+
              "or choose Do Not Detect to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_BYPASS)

[WarnDetectAcceptENG]
Caption     = "Network Adapter Card Detection"
DlgText1    = "Setup has detected the following network adapter card in your computer:"

DlgText2    = "Choose Continue to set up this adapter card, choose Find Next "+
              "to have Setup attempt to detect a different adapter card or choose "+
              "Do Not Detect if you want to manually select an adapter card."

Help        = "&Help"
Exit        = "Do &Not Detect"
Continue    = "Continue"
Cancel      = "&Find Next"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NCFOUND"
HelpContext = $(!IDH_DB_DETECT_FOUND)

[WarnDetectFailENG]
Caption     = "Network Adapter Card Detection"
DlgText     = "Setup did not detect any other network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to return to a previously detected adapter card."

Help        = "&Help"
Continue    = "Continue"
Exit        = "&Detect"

;no translation needed after this

DlgType     = Info
DlgTemplate = "NC3BUTN"
ExitState   = "Active"
HelpContext = $(!IDH_DB_DETECT_FAILED)

[WarnDetectFail2ENG]
DlgText     = "Setup did not detect any network adapter cards in your computer."+
              $(!LF)$(!LF)"Choose Continue to manually select an adapter card, "+
              "or choose Detect to retry the detection operation."






#####oemnxpi1.inf all
;------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
;       This lists the languages supported by this file.
;       If you add other languages to this list, you must
;       also add the appropriate text sections for the new
;       language
;------------------------------------------------------------------
[LanguagesSupported]
    ENG

;-------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
;
;       These are the text strings used to identify the options to
;       the user.  There should be a header and entry for every
;       language listed in the "LanguagesSupported" section.
;-------------------------------------------------------------------
[OptionsTextENG]
    NWLINK     = "Old NWLink IPX/SPX Compatible Transport"

;--------------------------------------------------------------------
;       Language Dependent Dialog Constants
;--------------------------------------------------------------------
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle            = "NWLink Setup"
ProductNWLINKDescription  = "NWLink Transport Driver"
ProductNWNBLINKDescription   = "NWLink NetBIOS Driver"
ProductNWLINKDisplayName = "NWLink"
ProductNWLINKTitle       = "NWLink Transport"
ProductNWLINKSYSDisplayName = "NWLinksys"
ProductNWLINKSYSTitle    = "NWLINK Transport Driver"
ProductNWNBLINKDisplayName  = "NWNBLink"
ProductNWNBLINKTitle        = "NWLink NetBIOS"
ProductNWNBLINKSYSDisplayName = "NWNBLinksys"
ProductNWNBLINKSYSTitle     = "NWLINK NetBIOS Driver"

CompetitorDisplayName = "Novell IPX/SPX II Transport"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[FileDependentDlgENG]
;
;--- No UI for NWLINK
;

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;
; don't need to localize the dialog type
;
DlgType      = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlgCantConfigure]
InfoMsgText = "The NWLINK service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click  OK.  You will then have the opportunity to configure the adapters."

;--------------------------------------------------------------------
;       Get the string to use while doing the install
;--------------------------------------------------------------------
[Billboard1ENG]
Status = "Installing NWLINK and related services..."

[FatalError1ENG]
Error = "Another IPX/SPX protocol driver is currently installed in this machine, "+
        "and the network interface cannot operate properly with both drivers installed. "+
        "If you still wish to install the NWLINK protocol driver, you must first "+
        "remove the "$(CompetitorDisplayName)" component and reboot your machine."

#####oemnadn1.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NE1000     = "Novell NE1000 Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Novell NE1000 Network Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Novell NE1000 Adapter Driver"
;
; Hardware
;
ProductHardwareNE1000Description        = "Novell NE1000 Adapter"
ProductSoftwareTitle    = "Novell NE1000 Adapter Driver"
ProductHardwareNE1000Title      = "Novell NE1000 Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)

Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADN2_INS)

#####oemnadlb.inf all
[LanguagesSupported]
    ENG

[OptionsTextENG]
    LOOP     = "MS Loopback Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "MS Loopback Adapter Card Setup"
ProductSoftwareDescription = "MS Loopback Adapter Driver"
ProductHardwareDescription = "MS Loopback Adapter"
ProductSoftwareTitle    = "MS Loopback Adapter Driver"
ProductHardwareTitle    = "MS Loopback Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgType = "MultiCombo"
DlgTemplate = "SINGLE_COMBO"
Label1 = "&Frame Type:"
Caption = $(FunctionTitle)
Combo1List = $(MediaList)
Combo1Out  = $(MediaChoice)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
HelpContext = $(!IDH_DB_OEMNADLB_INS)

#####oemnadam.inf i386
[LanguagesSupported]
    ENG
[OptionsTextENG]
    AM1500T = "Advanced Micro Devices AM2100/AM1500T/PCnet Adapter"
    AM1500T1 = "Novell/Anthem NE1500T Adapter"
    AM1500T2s = "Novell/Anthem NE2100 Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionAM1500TTitle   = "AMD AM2100/AM1500T/PCnet Adapter Setup"
FunctionAM1500T1Title   = "Novell/Anthem NE1500T Adapter Setup"
FunctionAM1500T2Title   = "Novell/Anthem NE2100 Adapter Setup"
ProductSoftwareAM1500TDescription       = "AMD AM2100/AM1500T/PCNet Driver"
ProductSoftwareAM1500T1Description      = "Novell/Anthem NE1500T Driver"
ProductSoftwareAM1500T2Description      = "Novell/Anthem NE2100 Driver"
ProductHardwareAM1500TDescription       = "AMD AM2100/AM1500T/PCNet Adapter"
ProductHardwareAM1500T1Description      = "Novell/Anthem NE1500T Adapter"
ProductHardwareAM1500T2Description      = "Novell/Anthem NE2100 Adapter"
ProductSoftwareAM1500TTitle     = "AMD Driver"
ProductSoftwareAM1500T1Title    = "Novell/Anthem NE1500T Driver"
ProductSoftwareAM1500T2Title    = "Novell/Anthem NE2100 Driver"
ProductHardwareAM1500TTitle     = "AMD AM2100/AM1500T/PCNet Adapter"
ProductHardwareAM1500T1Title    = "Novell/Anthem NE1500T Adapter"
ProductHardwareAM1500T2Title    = "Novell/Anthem NE2100 Adapter"
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
DlgType = "MultiCombo"
DlgTemplate = "WD"
Caption = $(Function$(Option)Title)
Combo1Label = "&IRQ Level:"
Combo2Label = "&DMA Channel:"
Combo3Label = "I/&O Port Address:"
Combo1List = $(IRQ_List)
Combo1Out  = $(IRQLevel)
Combo2List = $(DMAChannelList)
Combo2Out  = $(DMAChannel)
Combo3List = $(IOBaseAddressHexList)
Combo3Out  = $(IOBaseAddress)
ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
HelpContext = $(!IDH_DB_OEMNADAM_INS)

#####oemnade3.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNK3ISA509     = "3Com Etherlink III Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "3Com Etherlink III Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com Etherlink III Adapter Driver"
;
; Hardware
;
ProductHardwareELNK3ISA509Description        = "3Com Etherlink III Adapter"
ProductSoftwareTitle    = "3Com Etherlink III Adapter Driver"
ProductHardwareELNK3ISA509Title = "3Com Etherlink III Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

TransceiverList  = {"10 Base T", "Thick Net (AUI/DIX)","","Thin Net (BNC/COAX)"}
TransceiverDisplayList  = {"10 Base T", "Thick Net (AUI/DIX)","Thin Net (BNC/COAX)"}

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]

Label1 = "I/O &Port Address:"
Label2 = "&Interrupt Number:"
Label3 = "&Transceiver Type:"

;no translation needed after this

DlgType = "Combination"
DlgTemplate = "UBNDIS"
Caption = $(FunctionTitle)

Combo1List = $(IOADDR_Hex_List)
Combo1Out  = $(IOADDR_Hex_Value)
Combo2List = $(IRQList)
Combo2Out  = $(IRQValue)
Combo3List = $(TransceiverDisplayList)
Combo3Out  = $(TransceiverValue)

ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO}

HelpContext = $(!IDH_DB_OEMNADE3_INS)

#####oemnadee.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNK3EISA     = "3Com Etherlink III EISA Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;                             a
; Product Info
;
FunctionTitle   = "3Com Etherlink III EISA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com Etherlink III Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "3Com Etherlink III EISA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "3Com Etherlink III Adapter Driver"
ProductHardwareTitle    = "3Com Etherlink III EISA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for EISA
;

#####oemnaden.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    ELNK3MCA     = "3Com Etherlink III MCA Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "3Com Etherlink III MCA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "3Com Etherlink III MCA Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "3Com Etherlink III MCA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "3Com Etherlink III MCA Adapter Driver"
ProductHardwareTitle    = "3Com Etherlink III MCA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for micro channel
;

#####oemnadnm.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NE2000MCA     = "NE/2 and compatible MC Adapter"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "NE/2 and compatible MC Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "NE/2 and compatible MC Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "NE/2 and compatible MC Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "NE/2 and compatible MC Adapter Driver"
ProductHardwareTitle    = "NE/2 and compatible MC Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "NE2000"
Caption = $(FunctionTitle)

Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out  = $(IOBaseAddress)

ComboListItemsIn  = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}

EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}

HelpContext = $(!IDH_DB_OEMNADN2_INS)


#####oemnadfd.inf i386
[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NPMCA     = "Network Peripherals FDDI, MCA"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Network Peripherals FDDI, MCA Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription      = "Network Peripherals FDDI, MCA Adapter Driver"
;
; Hardware
;
ProductHardwareDescription      = "Network Peripherals FDDI, MCA Adapter"

CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"

ProductSoftwareTitle    = "Network Peripherals FDDI, MCA Adapter Driver"
ProductHardwareTitle    = "Network Peripherals FDDI, MCA Adapter"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for micro channel
;

#####oemnxpsn.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SNMP     = "SNMP Service"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "SNMP Setup"
;
; Software
;
ProductSoftwareDescription      = "SNMP Net Management Service"
;
; The user needs to install Microsoft TCP/IP before install SNMP.
; If TCPIP does not exist in the registry, the inf file will popup this
; message and exit.
;
ProductSoftwareDisplayName      = "SNMP Service"
ProductSoftwareTitle    = "SNMP Service"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for SNMP
;

#####oemnsvcu.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    TCPIPCU = "TCP/IP Utilities"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

GroupName    = "Accessories"


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
;


#####oemnsvsa.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    SAP = "SAP Agent"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSAPTitle       = "SAP Agent"
ProductSAPDescription = "SAP Agent"
ProductSAPDisplayName = "SAP Agent"

[InUsed]
Error = "SAP Agent is currently in use by other network protocols. Please removed all related services first."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
;


#####oemnsvft.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    FTPD     = "FTP Server"
;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "FTP Setup"
;
; Software
;
ProductSoftwareDescription      = "FTP Server"
;
; The user needs to install Microsoft TCP/IP before install FTP.
; If TCPIP does not exist in the registry, the inf file will popup this
; message and exit.
;
ProductSoftwareDisplayName      = "FTP Server"
ProductSoftwareTitle            = "FTP Server"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DefaultsENG]
AnonymousUsername = "guest"

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for FTP
;

#####oemnsvwi.inf
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    WINS     = "Windows Internet Name Service"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Windows Internet Name Service Setup"
;
; Software
;
ProductSoftwareDescription      = "Windows Internet Name Service"
ProductSoftwareDisplayName      = "Windows Internet Name Service"
ProductSoftwareTitle            = "Windows Internet Name Service"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

GroupName    = "Network Administration"
IconName     = "WINS Manager"

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
;
; No UI for WINS
;

#####oemnsvdh.inf
[LanguagesSupported]
    ENG
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

[FileConstantsENG]
ProductDHCPDisplayName  = "Microsoft DHCP Server"
ProductDHCPTitle        = "Microsoft DHCP Server"
ProductDHCPDescription  = "Microsoft DHCP Server"
GroupName    = "Network Administration"
IconName     = "DHCP Manager"

#####oemnsvsp.inf
[LanguagesSupported]
    ENG
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSTCPIPDisplayName        = "Simple TCP/IP Services"
ProductSTCPIPTitle              = "Simple TCP/IP Services"
ProductSTCPIPDescription        = "Simple TCP/IP Services"

#####oemnsvtp.inf
[LanguagesSupported]
    ENG
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductLPDDisplayName = "TCP/IP Print Server"
ProductLPDTitle = "Microsoft TCP/IP Printing"
ProductLPDDescription = "Microsoft TCP/IP Printing"

#####oemnxptc.inf
[LanguagesSupported]
    ENG
[OptionsTextENG]
    TC     = "TCP/IP Protocol and related components"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
NoNewComponents = "No New Components to Install."
FunctionTitle   = "TCP/IP Setup"
ProductNETBTDescription           = "NetBT System Driver"
ProductNETBTDisplayName   = "WINS Client(TCP/IP)"
ProductNETBTTitle         = "WINS Client(TCP/IP)"
ProductTELNETDisplayName = "Telnet"
ProductTELNETTitle      = "Telnet Networking Support Environment"
ProductTELNETSYSDisplayName = "Telnetsys"
ProductTELNETSYSTitle     = "Telnet Driver"
ProductLMHOSTSDisplayName = "TCP/IP NetBIOS Helper"
ProductLMHOSTSTitle     = "TCP/IP NetBIOS Helper"
ProductDHCPDisplayName = "DHCP Client"
ProductDHCPTitle     = "DHCP Client"
ProductTCDisplayName = "TCP/IP Service"
ProductTCTitle     = "TCP/IP Protocol"
ProductTCDescription         = "TCP/IP Protocol Driver"
ProviderDisplayName     = "TCP/IP"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
RASRebindError = "Setup has discovered that you have Remote Access Services installed. Do you want to configure RAS to support the TCP/IP protocol?"

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
[InfoDlg]
STF_MB_TITLE = "Information Message"
DlgType = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1
[InfoDlgCantConfigure]
InfoMsgText = "The TCP/IP service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click  OK.  You will then have the opportunity to configure the adapters."
[WarningDlgENG]
STF_MB_TITLE = "TCP/IP Setup Warning"
DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1
[Billboard1ENG]
Status = "Installing TCP/IP and related services..."

#####oemnxpip.inf all
;------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
;       This lists the languages supported by this file.
;       If you add other languages to this list, you must
;       also add the appropriate text sections for the new
;       language
;------------------------------------------------------------------
[LanguagesSupported]
    ENG

;-------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
;
;       These are the text strings used to identify the options to
;       the user.  There should be a header and entry for every
;       language listed in the "LanguagesSupported" section.
;-------------------------------------------------------------------
[OptionsTextENG]
    NWLNKIPX     = "NWLink IPX/SPX Compatible Transport"

;--------------------------------------------------------------------
;       Language Dependent Dialog Constants
;--------------------------------------------------------------------
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle            = "NWLink IPX/SPX Compatible Transport Setup"
ProductNWLNKIPXDescription  = "NWLink IPX/SPX Compatible Transport Driver"
ProductNWLNKIPXDisplayName = "NWLink IPX/SPX Compatible Transport Protocol"
ProductNWLNKIPXTitle       = "NWLink IPX/SPX Compatible Transport"

ProductNWLNKNBDescription   = "NWLink NetBIOS Driver"
ProductNWLNKNBDisplayName  = "NWLink NetBIOS"
ProductNWLNKNBTitle        = "NWLink NetBIOS"
ProductNWLNKNBSYSDisplayName = "NWLinkNBsys"
ProductNWLNKNBSYSTitle     = "NWLINK NetBIOS Driver"

ProductNWLNKSPXDescription  = "NWLink SPX Protocol Driver"
ProductNWLNKSPXDisplayName = "NWLink SPX/SPXII Protocol"
ProductNWLNKSPXTitle       = "NWLink SPX Protocol"

CompetitorDisplayName = "NWLink IPX/SPX II Transport"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

RASRebindError = "Setup has discovered that you have Remote Access Services installed. Do you want to configure RAS to support the NWLINK protocol?"

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel"

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[FileDependentDlgENG]
;
;--- No UI for NWLNK
;

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlg]
STF_MB_TITLE = "Information Message"

;
; don't need to localize the dialog type
;
DlgType      = "MessageBox"
STF_MB_TEXT  = $(InfoMsgText)
STF_MB_TYPE  = 1
STF_MB_ICON  = 5
STF_MB_DEF   = 1

;--------------------------------------------------------------------
;       Input DIALOGS
;--------------------------------------------------------------------
[InfoDlgCantConfigure]
InfoMsgText = "The IPX Protocol service is not currently configured to use any adapters."+
    "  If you have just installed it, return to the Networks dialog and "+
    "click  OK.  You will then have the opportunity to configure the adapters."

[InUseENG]
InfoMsgText = "The IPX Protocol service is being used by another service(s). "+
    "Please remove other related components before removing IPX Protocol."

;--------------------------------------------------------------------
;       Get the string to use while doing the install
;--------------------------------------------------------------------
[Billboard1ENG]
Status = "Installing IPX Protocol and related services..."

[FatalError1ENG]
Error = "Another IPX/SPX protocol driver is currently installed in this machine, "+
        "and the network interface cannot operate properly with both drivers installed. "+
        "If you still wish to install the NWLNK protocol driver, you must first "+
        "remove the "$(CompetitorDisplayName)" component and reboot your machine."

#####oemnsvnw.inf
[LanguagesSupported]
    ENG
;
; Language depended section
;
[WorkstationENG]
    NWType = "Client Service for NetWare"
[GatewayENG]
    NWType = "Gateway Service for NetWare"
[OptionsWINNTTextENG]
    NWWKSTA       = "Client Service for NetWare"
[OptionsLANMANNTTextENG]
    NWWKSTA       = "Gateway Service for NetWare"

[FileConstantsENG]
NotEnoughSpace = "Out of disk space. Please remove some files before install "$(NWType)"."
UpgradeBetaOnTopOfDaytona = "You cannot update the beta version of "$(NWType)" over Windows NT 3.5's "$(NWType)"."
InstallNWLINKFirst = "Please install the NWLINK IPX/SPX Compatible Transport before you install the "$(NWType)"."
InstallNTWKSTAFirst = "Please install the Windows NT Workstation service before you install the "$(NWType)"."
RemoveAndReboot    = "Please remove any existing "$(NWType)" component and reboot your machine before installing the latest version of "$(NWType)"."
UpgradeFirst = "Please install the Windows NT patch before installing the "$(NWType)"."
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = $(NWType)" Setup"
ProductNWWKSTADescription         = $(NWType)
ProductNWRDRDescription           = "NetWare Redirector Compatible Service"
ProviderRDRName                 = "NetWare Compatible Redirector"
ProductNWWKSTATitle       = $(NWType)
ProductNWWKSTADisplayName = $(NWType)
ProductNWRDRDisplayName   = "NetWare Rdr"
ProductNWRDRTitle         = "NetWare Redirector"
ProductProviderName = "NetWare Network"
ProductPrintProviderName = "NetWare Network"
OldPrintProviderName = "Netware(R) Network"

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
ShellCodeErrorText = "Shell Code Error"

[FileDependentDlgENG]
; nothing



#####oemnsvbh.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    NETMON     = "Network Monitor Agent"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Network Monitor Agent"
;
; Software
;
ProductSoftwareDescription      = "Microsoft Network Monitor Agent"
;
ProductSoftwareDisplayName = "Network Monitor Agent Driver"
ProductSoftwareTitle    = "Network Monitor Agent"

ProductNMAgentDisplayName = "Network Monitor Agent"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

#####oemnsvri.inf
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    REMOTEBOOT     = "Remoteboot Service"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


;
; Product Info
;
FunctionTitle   = "Remoteboot Setup"
;
; Software
;
ProductSoftwareDescription      = "Remoteboot Service"
ProductSoftwareDisplayName      = "Remoteboot Service"
ProductSoftwareTitle    = "Remoteboot Service"

ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
;
; Program group information
;
RplGroup    = "Network Administration"
RplMgr    = "Remoteboot Manager"


[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Edit1Label = "&Remoteboot directory:"
CheckBox1 = "&Migrate Remoteboot directory from LAN Manager 2.2"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "QUERY_RPL_PATH"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}

HelpContext = $(!IDH_DB_OEMNSVRI_INS)

EditTextLim = 256
EditTextIn  = $(RPLDIR)
EditFocus   = "ALL"
RCCtlFocusOn = 403

[NonFatalError1ENG]
Error = "The Remoteboot directory must be an absolute path."

[DoAskSourceDlgTextENG]
    DlgText        = "Now please enter the full path of the Remoteboot Client"+
                     " files.  These files are located in the \CLIENTS\RPL  directory "+
                     "of the Windows NT Server CD or, if installing from floppy"+
                     " disks, type a drive path (such as A:\i386) and Setup will "+
                     "prompt you for the correct disk."


#####oemnadt2.inf all
[LanguagesSupported]
    ENG
[OptionsTextENG]
    IBMTOK2ISA     = "IBM Token-Ring Network 16/4 ISA Adapter II"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "IBM Token-Ring 16/4 Adapter II Card Setup"
ProductSoftwareDescription      = "IBM Token-Ring 16/4 ISA Adapter II Driver"
ProductHardwareIBMTOK2ISADescription        = "IBM Token-Ring 16/4 ISA Adapter II"
ProductSoftwareTitle    = "IBM Token-Ring 16/4 ISA Adapter II Driver"
ProductHardwareIBMTOK2ISATitle = "IBM Token-Ring 16/4 ISA Adapter II"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
Combo1Label = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "IBMTOK2"
Caption = $(FunctionTitle)
Combo1List = $(IOADDR_Hex_List)
Combo1Out  = $(IOADDR_Hex_Value)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = 17
EditTextIn = $(NetworkAddress)
Edit1Label = "&NetworkAddress"
HelpContext = $(!IDH_DB_OEMNADT2_INS)

#####oemnadte.inf all
[LanguagesSupported]
    ENG
[OptionsTextENG]
    IBMTOK2E     = "IBM Token Ring EISA Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "IBM Token Ring EISA Adapter Card Setup"
ProductSoftwareDescription      = "IBM Token Ring EISA Adapter Driver"
ProductHardwareDescription      = "IBM Token Ring EISA Adapter"
CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"
ProductHardwareTitle    = "IBM Token Ring EISA Adapter"
ProductSoftwareTitle    = "IBM Token Ring EISA Adapter Driver"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
Edit1Label = "&Network Address:"
DlgType = "Edit"
DlgTemplate = "NETWORK_NUMBER"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADTE_INS)
EditTextLim = 17
EditTextIn  = $(NetworkAddress)
EditFocus   = "ALL"
RCCtlFocusOn = 403



#####oemnsvrc.inf
[LanguagesSupported]
    ENG
[OptionsTextENG]
    RCMD     = "Remote Command Server"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

[FileConstantsENG]
ProductRCMDDisplayName  = "Remote Command Server"
ProductRCMDTitle        = "Remote Command Server"
ProductRCMDDescription  = "Microsoft Remote Command Server"

#####oemnadpm.inf all
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------

[LanguagesSupported]
    ENG

;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user.  There
; are separate sections for each language supported.  The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------

[OptionsTextENG]
    P189X     = "ProNET-4/16 p189X NIC"

[PacketChoices]
Packet1="4Kb",4210
Packet2="18Kb",17986

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[FileConstantsENG]
;
;  Variables to support thermometer gauge and error dialogs
;
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

FunctionTitle   = "Proteon p189X Adapter Card Setup"
ProductSoftwareDescription      = "Proteon RapiDriver"
ProductHardwareDescription      = "Proteon p189X ProNET-4/16 NIC"
CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"
ProductHardwareTitle    = "Proteon p189X ProNET-4/16 NIC"
ProductSoftwareTitle    = "Proteon RapiDriver"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."

[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
Group1 = "CardSpeed"
Radio1 = "&4"
Radio2 = "&16"
Edit1Label = "&Network Address:"

;no translation needed after this

DlgType = "RadioCombination"
DlgTemplate = "IBM_TOKEN"
Caption = $(FunctionTitle)
ComboListItemsIn = {}
ComboListItemsOut = {}
EditTextLim = 17
EditTextIn = $(NetworkAddress)

OptionsGreyed = {}

HelpContext = $(!IDH_DB_OEMNADP9_INS)
RCCtlFocusOn = 403

#####oemnadar.inf all
[OptListENG]
OptList_1 = tc$arcnet "Arcnet/TCNS (All Types)",     "tcarc", "ARCNET/TCNS Adapter", "ARCNET or Thomas-Conrad TCNS Adapter"
OptList_2 = tc$tcns,  "Thomas-Conrad TCNS",          "tcarc", "TCNS Adapter",        "Thomas-Conrad 100Mbps TCNS"

[FileConstantsENG]
   ProCaption              = "Windows NT Setup"
   ProCancel               = "Cancel"
   ProCancelMsg            = "Your ARCNET/TCNS Windows NT Networking "+
                             "Adapter is not correctly installed.  Are "+
                             "you sure you want to cancel copying files?"
   ProCancelCap            = "Network Setup Message"
   ProText1                = "Copying:"
   ProText2                = "To:"
   SoftwareTitle           = "ARCNET/TCNS Driver"
   SoftwareDescription     = "ARCNET/TCNS Adapter Driver"

[DialogConstantsENG]
   Help                    = "&Help"
   Exit                    = "Cancel"
   OK                      = "OK"
   HelpContext             = ""
   Continue                = "Continue"
   Cancel                  = "Cancel"
   FunctionTitle           = "ARCNET/TCNS Adapter Setup"
   InterruptLabel          = "&Interrupt Number:"
   BaseIoLabel             = "I/O &Port Base Addr:"
   MemoryLabel             = "&Memory Address:"
   TcnsCaption             = "Thomas-Conrad TCNS Adapter Setup"
   TcnsEISACaption         = "Thomas-Conrad TCNS (TC3147) Adapter Setup"
   SlotNumberLabel         = "&Slot Number:"

[LanguagesSupported]
   ENG




